Published April 25, 2007 | Version v1
Journal article

Poly(m-aminobenzene sulfonic acid) functionalized single-walled carbon nanotubes based gas sensor

  • 1. Department of Chemical and Environmental Engineering, University of California-Riverside, Riverside, CA 92521 (United States)
  • 2. Center for Nanoscale Science and Engineering, University of California-Riverside, Riverside, CA 92521 (United States)

Description

We have demonstrated a NH3, NO2 and water vapour sensor based on poly(m-aminobenzene sulfonic acid) functionalized single-walled carbon nanotube (SWNT-PABS) networks. The SWNT-PABS based sensors were fabricated by simple dispersion of SWNT-PABS on top of pre-fabricated gold electrodes. SWNT-PABS sensors showed excellent sensitivity with ppbv level detection limits (i.e., 100 ppbv for NH3 and 20 ppbv for NO2) at room temperature. The response time was short and the response was totally reversible. The sensitivity could be tuned by adjusting the sensor initial resistance. The sensors were also suitable for monitoring relative humidity in air

Additional details

Identifiers

DOI
10.1088/0957-4484/18/16/165504;
PII
S0957-4484(07)40136-2;

Publishing Information

Journal Title
Nanotechnology (Print)
Journal Volume
18
Journal Issue
16
Journal Page Range
p. 165504
ISSN
0957-4484