Published May 1, 2012 | Version v1
Journal article

Fabrication and characterization of silk fibroin/bioactive glass composite films

  • 1. Department of Chemistry, Xiasha Higher Education Zone, Zhejiang Sci-Tech University, Hangzhou, 310018 (China)
  • 2. Engineering Research Center for Eco-Dyeing and Finishing of Textiles, Ministry of Education, Zhejiang Sci-Tech University, Hangzhou, 310018 (China)

Description

Composite films of silk fibroin (SF) with nano bioactive glass (NBG) were prepared by the solvent casting method, and the structures and properties of the composite films were characterized. Fourier transform infrared (FT-IR) spectroscopy analysis shows that the random coil and β-sheet structure co-exist in the SF films. Results of field emission scanning electron microscope (FESEM) indicate that the NBG particles are uniformly dispersed in the SF films. The measurements of the water contact angles suggest that the incorporation of NBG into SF can improve the hydrophilicity of the composites. The bioactivity of the composite films was evaluated by soaking in 1.5 times simulated body fluid (1.5 × SBF), and formation of a hydroxycarbonate apatite (HCA) layer was determined by XRD and FESEM. The results show that the SF/NBG composite film is bioactive as it induces the formation of HCA on the surface of the composite film after soaking in 1.5 × SBF for 7 days. In vitro osteoblasts attachment and proliferation tests show that the composite film is a good matrix for the growth of osteoblasts. Consequently, the incorporation of NBG into the SF film can enhance both the bioactivity and biocompatibility of the film, which suggests that the SF/NBG composite film may be a potential biomaterial for bone tissue engineering. - Highlights: ► The incorporation of NBG into SF can improve the hydrophilicity of the SF/NBG composite films. ► The SF/NBG composite films show the better bioactivity than the pure SF film. ► The SF/NBG composite films facilitate cell growth and promote cell proliferation and differentiation.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.msec.2012.01.033

Additional details

Identifiers

DOI
10.1016/j.msec.2012.01.033;
PII
S0928-4931(12)00049-5;

Publishing Information

Journal Title
Materials Science and Engineering. C, Biomimetic Materials, Sensors and Systems
Journal Volume
32
Journal Issue
4
Journal Page Range
p. 822-829
ISSN
0928-4931

Optional Information

Copyright
Copyright (c) 2012 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.