The constitution of the ternary system iron-molybdenum-carbon
Creators
- 1. Vienna Univ. (Austria). Inst. fuer Physikalische Chemie
- 2. Vienna Univ. (Austria). Inst. fuer Anorganische Chemie
- 3. Connecticut Univ., Storrs (USA). Inst. of Materials Science
Description
The ternary system Fe-Mo-C is reinvestigated by melting point determination, differential thermal analysis, X-ray diffraction and metallography. The carbide ξ-Fe11Mo6C5 forms from (liq.+γ-Fe+Mo2C) at 1202deg C. The fields of primary crystallisation of this phase as well as of η-Fe3Mo3C are determined and the revised melting surface projection of the iron rich (<50 at.% Fe) corner is presented. The isothermal section at 1000deg C shows both carbides to be stable as well as Mo2C to coexist with α-Fe. The melting surface and this isothermal section are linked by the Schulz-Scheil diagram, which is derived from DTA measurements. Two isopleths (at 55 and 85 at.% Fe) are given. At 800deg C the ternary phases η-Fe3Mo3C and τ-Fe21Mo2C6 are found stable but not ξ-Fe11Mo6C5. (orig.)
Abstract (German)
Der Dreistoff Fe-Mo-C wurde mittels Schmelzpunktmessungen, Differential-Thermoanalyse, Roentgenbeugung und Metallographie neu untersucht. Das Carbid ξ-Fe11Mo6C5 bildet sich peritektisch aus liq.+γ-Fe+Mo2C. Das Primaerkristallisationsgebiet dieser Phase sowie jenes von η-Fe3Mo3C wurden bestimmt. Eine entsprechende revidierte Projektion auf die Schmelzflaeche der eisenreichen Ecke (<50 At.-% Fe) wird praesentiert. Der isotherme Schnitt bei 1000deg C zeigt beide ternaeren Phasen sowie die Koexistenz von Mo2C mit α-Fe. Die Schmelzflaeche und dieser isotherme Schnitt werden durch das Schulz-Scheil-Diagramm, welches mit Hilfe von DTA-Daten aufgestellt wurde, gekoppelt. Zwei vertikale Schnitte (Isoplethen bei 55 sowie 85 At.-% Fe) sind dargestellt. Bei 800deg C (isothermer Schnitt) sind η-Fe3Mo3C und τ-Fe21Mo2C stabil nicht aber ξ-Fe11Mo6C5. (orig.)Additional details
Publishing Information
- Journal Title
- Zeitschrift fuer Metallkunde
- Journal Volume
- 82
- Journal Issue
- 7
- Series
- Z. Metallkd.
- Journal Page Range
- 539-543
- ISSN
- 0044-3093
- CODEN
- ZEMTA
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 22088445
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- CARBON ADDITIONS; CHEMICAL REACTIONS; DIFFERENTIAL THERMAL ANALYSIS; IRON ALLOYS; MOLYBDENUM ALLOYS; PHASE DIAGRAMS; PHASE STUDIES; SOLUBILITY; TERNARY ALLOY SYSTEMS
- Descriptors DEC
- ALLOY SYSTEMS; ALLOYS; DIAGRAMS; INFORMATION; THERMAL ANALYSIS