Influence of isothermal hot pressing-doping treatment on the electrical and mechanical properties of bulk Bi-Sr-Ca-Cu-O

The influences of (isothermal hot pressing-doping) treatment on the microstructure, electrical and mechanical properties of Bi₂Sr_3-xCa_xCu₂O_8+δ (BSCCO), x ranging from 0.0 to 2 are assessed. BSCCO pellets were prepared by isothermal hot pressing (IHP) technique. The experimental works in this study consists of dc electrical resistivity measurements for electrical and superconducting properties, microhardness tests for mechanical characteristics, powder x-ray diffraction (XRD) for phase analyses (phase ratio), differential thermal analysis (DTA) for melting behaviour and scanning electron microscopy (SEM) for microstructure investigations. The results indicated that the Ca²⁺ doping and isothermal hot pressing increased significantly the superconducting transition temperature (T^o_c), which promotes the formation of high-Tc phase. Additionally, Vickers microhardness (VHN), Young's modulus, fracture toughness, brittleness index and elastic stiffness coefficient were also improved. Moreover, IHP-Doping improved the microstructure and the density of the BSCCO studied samples. Microhardness was found to be load dependent. Otherwise, we evaluated the load independent hardness, Young's modulus, fracture toughness and brittleness index of BSCCO samples. The possible reasons for the observed enhancement in electrical and mechanical properties due to (i) the homogeneity of grain region distribution (ii) the enhancement of superconducting phases.