Enhancing the microdialysis recovery for sampling of Cu and Ni by incorporating humic acid in the perfusion liquid

A strategy to enhance the microdialysis relative recovery for sampling of Cu and Ni ions is presented. Enhanced recovery was achieved by incorporating humic acid, a binding agent, in the microdialysis perfusion liquid during sampling from a Cu and Ni standard solution mixture. All microdialysis sampling experiments were carried out at room temperature under quiescent conditions using a concentric type of microdialysis probe with an adjustable effective dialysis length. For all metal determinations electrothermal atomic absorption spectrometry was employed. Metal recoveries were shown to be dependent on the membrane molecular weight cut-off, perfusion rate, sample solution pH, perfusion liquid composition as well as perfusion liquid pH. Complete recoveries (100%) of Cu and Ni were obtained by microdialysis sampling using a 10 kDa molecular weight cut-off polysulfone membrane at a flow-rate of 2 μl/min employing a 0.05% (w/v) optimal composition of humic acid incorporated in the perfusion liquid. The optimal sampling pH of humic acid was determined to be 6 where most oxygen containing functional groups are dissociated and available for metal binding. These data have important ramifications for sampling and determination of metal ions in small sample solutions (∼10 ml) at very low concentrations in the ppb range