A new mixed method with finite difference and finite element method for neutron diffusion calculation

A new method for obtaining three-dimensional neutron flux distribution in a reactor has been developed by taking into account the fact that the X-Y planar geometry is generally complex but the geometry along Z-axis is simple. In this method, the finite element method is applied to the X-Y plane calculation and the finite difference method to the Z-axis. For solving a three-dimensional neutron diffusion equation, these two methods are iterated successively until a consistency of the leakage coefficients is attained between the two. The present method is embodied as a computer program FEDM for FACOM M200 computer. With this program, a three-dimensional diffusion calculation was performed for comparing some numerical results with those by a conventional standard computer code ADC. The comparison has shown that they agree well with each other. Computing time required for this problem by the FEDM was shorter than that by the ADC for obtaining same accuracy on the eigenvalue. To indicate usefulness of this method, a demonstration calculation for a reactor with a complex geometry was performed, which was a difficult case to calculate with a conventional finite difference code. (author)