Inactivation of airborne bacteria using different UV sources: Performance modeling, energy utilization, and endotoxin degradation

Highlights: • UV inactivation performance was simulated by a Beer-Lambert law-based model. • The inactivation efficiency of three UV sources was compared. • Low influent E. coli concentrations and high UV doses resulted in high EC value. • The release and removal of free and bound endotoxins were observed. -- Abstract: Airborne bacteria-containing bioaerosols have attracted increased research attention on account of their adverse effects on human health. Ultraviolet germicidal irradiation (UVGI) is an effective method to inactivate airborne microorganisms. The present study models and compares the inactivation performance of three UV sources in the UVGI for aerosolized Escherichia coli. Inactivation efficiency of 0.5, 2.2 and 3.1 logarithmic order was obtained at an exposure UV dose of 370 J/m³ under UVA (365 nm), UVC (254 nm) and UVD (185 nm) sources, respectively. A Beer–Lambert law-based model was developed and validated to compare the inactivation performances of the UV sources, and modeling enabled prediction of inactivation efficiency and analysis of the sensitivity of several parameters. Low influent E. coli concentrations and high UV doses resulted in high energy consumption (EC). The change in airborne endotoxin concentration during UV inactivation was analyzed, and UVC and UVA irradiation showed no marked effect on endotoxin degradation. By contrast, both free and bound endotoxins could be removed by UVD treatment, which is attributed to the ozone generated by the UVD source. The results of this study can provide a better understanding of the air disinfection and airborne endotoxin removal processes.