Published May 2012 | Version v1
Journal article

Iron oxide nanoparticle synthesis in aqueous and membrane systems for oxidative degradation of trichloroethylene from water

  • 1. University of Kentucky, Department of Chemical and Materials Engineering (United States)
  • 2. University of Kentucky, Department of Civil Engineering (United States)
  • 3. University of California at Berkeley, Department of Civil and Environmental Engineering (United States)

Description

The potential for using hydroxyl radical (OH•) reactions catalyzed by iron oxide nanoparticles (NPs) to remediate toxic organic compounds was investigated. Iron oxide NPs were synthesized by controlled oxidation of iron NPs prior to their use for contaminant oxidation (by H2O2 addition) at near-neutral pH values. Cross-linked polyacrylic acid (PAA) functionalized polyvinylidene fluoride (PVDF) microfiltration membranes were prepared by in situ polymerization of acrylic acid inside the membrane pores. Iron and iron oxide NPs (80–100 nm) were directly synthesized in the polymer matrix of PAA/PVDF membranes, which prevented the agglomeration of particles and controlled the particle size. The conversion of iron to iron oxide in aqueous solution with air oxidation was studied based on X-ray diffraction, Mössbauer spectroscopy and BET surface area test methods. Trichloroethylene (TCE) was selected as the model contaminant because of its environmental importance. Degradations of TCE and H2O2 by NP surface generated OH• were investigated. Depending on the ratio of iron and H2O2, TCE conversions as high as 100 % (with about 91 % dechlorination) were obtained. TCE dechlorination was also achieved in real groundwater samples with the reactive membranes.

Additional details

Identifiers

Publishing Information

Journal Title
Journal of Nanoparticle Research
Journal Volume
14
Journal Issue
5
Journal Page Range
p. 1-16
ISSN
1388-0764

Optional Information

Copyright
Copyright (c) 2012 Springer Science+Business Media B.V.