Published November 1, 2017 | Version v1
Journal article

Compressive strength, flexural strength and water absorption of concrete containing palm oil kernel shell

  • 1. Faculty of Civil and Environmental Engineering, Universiti Tun Hussein Onn Malaysia, Parit Raja, Batu Pahat, 86400, Johor (Malaysia)

Description

Effect of inclusion of palm oil kernel shell (PKS) and palm oil fibre (POF) in concrete was investigated on the compressive strength and flexural strength. In addition, investigation of palm oil kernel shell on concrete water absorption was also conducted. Total of 48 concrete cubes and 24 concrete prisms with the size of 100mm × 100mm × 100mm and 100mm × 100mm × 500mm were prepared, respectively. Four (4) series of concrete mix consists of coarse aggregate was replaced by 0%, 25%, 50% and 75% palm kernel shell and each series were divided into two (2) main group. The first group is without POF, while the second group was mixed with the 5cm length of 0.25% of the POF volume fraction. All specimen were tested after 7 and 28 days of water curing for a compression test, and flexural test at 28 days of curing period. Water absorption test was conducted on concrete cube age 28 days. The results showed that the replacement of PKS achieves lower compressive and flexural strength in comparison with conventional concrete. However, the 25% replacement of PKS concrete showed acceptable compressive strength which within the range of requirement for structural concrete. Meanwhile, the POF which should act as matrix reinforcement showed no enhancement in flexural strength due to the balling effect in concrete. As expected, water absorption was increasing with the increasing of PKS in the concrete cause by the porous characteristics of PKS (paper)

Availability note (English)

Available from http://dx.doi.org/10.1088/1757-899X/271/1/012073

Additional details

Publishing Information

Journal Title
IOP Conference Series. Materials Science and Engineering (Online)
Journal Volume
271
Journal Issue
1
Journal Page Range
[6 p.]
ISSN
1757-899X

Conference

Title
Global Congress on Construction, Material and Structural Engineering 2017
Acronym
GCoMSE2017
Dates
28-29 Aug 2017
Place
Johor Bahru (Malaysia)

INIS

Country of Publication
United Kingdom
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
52066598
Subject category
S36: MATERIALS SCIENCE; S37: INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY;
Resource subtype / Literary indicator
Conference
Descriptors DEI
ABSORPTION; COMPRESSION STRENGTH; CONCRETES; CURING; FIBERS; FLEXURAL STRENGTH; KERNELS; MATRICES; PALM OIL; POROUS MATERIALS; WATER
Descriptors DEC
BUILDING MATERIALS; HYDROGEN COMPOUNDS; MATERIALS; MECHANICAL PROPERTIES; OILS; ORGANIC COMPOUNDS; OTHER ORGANIC COMPOUNDS; OXYGEN COMPOUNDS; SORPTION; VEGETABLE OILS