Results 1 - 10 of 460011
Results 1 - 10 of 460011. Search took: 0.137 seconds
|Sort by: date | relevance|
[en] This paper discusses the present state and the future potential of solar thermal and photovoltaic (PV) technologies, and examines both the environmental implications of these technologies and the economics which determine their viability in the energy market. Although some significant cost reductions have been achieved, particularly in PV technology, solar conversion technologies are still not generally competitive against conventional fuels, and future cost reductions may be limited. It is argued that fiscal measures will be necessary if solar conversion technologies are to make a significant global impact. (Author)
[en] A six-year project to design, develop and market an affordable and reliable solar lantern for production in developing countries, building on work funded by the World Bank and implemented by Energy Alternatives Africa (EAA), Kenya. (author)
[en] The RESAssess software is developed to assist in the preliminary assessment of potential renewable energy projects. The first release includes water pumping solar systems, passive solar systems, wind, and geothermal energy and biomass. The program guides the users in the design of their systems, by providing initial estimates. By changing the system’s parameters, users are able to quickly screen an effective technology and system size depending on load, climatic conditions, and season of use. This paper describes scope of models (radiation, wind, geothermal, heat transfer) used to predict energy production from energy resource systems, climatic variables and system parameters and software technology for realising the project. Keywords: Energy projects, Renewable energy, Web system
[en] Highlights: • Trigeneration technologies classified and reviewed according to prime movers. • Relevant heat recovery equipment discussed with thermal energy storage. • Trigeneration evaluated based on energy, exergy, economy, environment criteria. • Design, optimization, and decision-making methods classified and presented. • System selection suggested according to user preferences. - Abstract: Electricity, heating, and cooling are the three main components constituting the tripod of energy consumption in residential, commercial, and public buildings all around the world. Their separate generation causes higher fuel consumption, at a time where energy demands and fuel costs are continuously rising. Combined cooling, heating, and power (CCHP) or trigeneration could be a solution for such challenge yielding an efficient, reliable, flexible, competitive, and less pollutant alternative. A variety of trigeneration technologies are available and their proper choice is influenced by the employed energy system conditions and preferences. In this paper, different types of trigeneration systems are classified according to the prime mover, size and energy sequence usage. A leveled selection procedure is subsequently listed in the consecutive sections. The first level contains the applied prime mover technologies which are considered to be the heart of any CCHP system. The second level comprises the heat recovery equipment (heating and cooling) of which suitable selection should be compatible with the used prime mover. The third level includes the thermal energy storage system and heat transfer fluid to be employed. For each section of the paper, a survey of conducted studies with CHP/CCHP implementation is presented. A comprehensive table of evaluation criteria for such systems based on energy, exergy, economy, and environment measures is performed, along with a survey of the methods used in their design, optimization, and decision-making. Moreover, a classification diagram of the main CHP/CCHP system components is summarized. A general selection approach of the appropriate CCHP system according to specific needs is finally suggested. In almost all reviewed works, CCHP systems are found to have positive technical and performance impacts.
[en] Highlights: • New Hybrid system coupling photovoltaic and thermoelectric are studied. • Thermal transfer Method. • The effect of coupling types which are direct and indirect are examined. • The Heat Transfer is modeled in Hybrid system. • The indirect coupling significantly improves the overall efficiency. - Abstract: Advanced photovoltaic devices with a high performance/cost ratio is a major concern nowadays. In the present study, we investigate the energetic efficiency of a new concept based on an indirect (instead of direct) photovoltaic and thermoelectric coupling. Using state-of-the-art thermal transfer calculations, we have shown that such an indirect coupling is an interesting alternative to maximize solar energy exploitation. In our model, a concentrator is placed between photovoltaic and thermoelectric systems without any physical contact of the three components. Our major finding showed that the indirect coupling significantly improve the overall efficiency which is very promising for future photovoltaic developments.
[en] Highlights: ► A solar desiccant cooling/heating system is simulation studied. ► The mean deviation is about 10.5% for temperature and 9.6% for humidity ratio. ► The 51.7% of humidity load and 76% of the total cooling can be handled. ► About 49.0% of heating load can be handled by solar energy. ► An optimization of solar air collector has been investigated. - Abstract: To increase the fraction of solar energy might be used in supplying energy for the operation of a building, a solar desiccant cooling and heating system was modeled in Simulink. First, base case performance models were programmed according to the configuration of the installed solar desiccant system and verified by the experimental data. Then, the year-round performance about the system was simulated. Last, design parameters of solar air collectors were optimized that include collector area, air leakage and thermal insulation. Comparison between numerical and experimental results shows good agreement. During the simulation, the humidity load for 63 days (51.7%) can be totally handled by the two-stage desiccant cooling unit. For seasonal total heating load, about 49.0% can be handled by solar energy. Based on optimized results, the thermal energy subsystem functioned to its expected performance in solar energy collection and thermal storage
[en] This paper deals with a numerical and experimental investigation of a daily solar storage system conceived and built in Laboratoire de Maitrise des Technologies de l Energie (LMTE, Borj Cedria). This system consists mainly of the storage unit connected to a solar collector unit. The storage unit consists of a wooden case with dimension of 5 m3 (5 m x 1m x 1m) filed with fin sand. Inside the wooden case was buried a network of a polypropylene capillary heat exchanger with an aperture area equal to 5 m2. The heat collection unit consisted of 5 m2 of south-facing solar collector mounted at a 37 degree tilt angle. In order to evaluate the system efficiency during the charging period (during the day) and discharging period (during the night) an energy and exergy analyses were applied. Outdoor experiments were also carried out under varied environmental conditions for several consecutive days. Results showed that during the charging period, the average daily rates of thermal energy and exergy stored in the heat storage unit were 400 and 2.6 W, respectively. It was found that the net energy and exergy efficiencies in the charging period were 32 pour cent and 22 pour cent, respectively. During the discharging period, the average daily rates of the thermal energy and exergy recovered from the heat storage unit were 2 kW and 2.5 kW, respectively. The recovered heat from the heat storage unit was used for the air-heating of a tested room (4 m x 3 m x 3 m). The results showed that 30 pour cent of the total heating requirement of the tested room was obtained from the heat storage system during the whole night in cold seasons
[en] To resolve the energy crisis efforts have been made in exploring and utilizing nonconventional energy resources since last few decades. Geothermal energy is one such energy resource. Fossil fuels are the earth's energy capital like money deposited in bank years ago. The energy to build this energy came mainly from the sun. Steam geysers and hot water springs are other manifestations of geothermal energy. Most of the 17 countries that today harness geothermal energy have simply tapped such resources where they occur. (author). 8 refs., 4 tabs., 1 fig
[en] Highlights: • Mode 4 has the highest exergy efficiency. • Mode 2 has the largest exergy density. • Second heat exchanger has the largest exergy destruction. - Abstract: Advanced adiabatic compressed air energy storage system plays an important role in smoothing out the fluctuated power from renewable energy. Under different operation modes of charge-discharge process, thermodynamic behavior of system will vary. In order to optimize system performance, four operation modes of charge-discharge process are proposed in this paper. The performance difference of four modes is compared with each other based on energy analysis and exergy analysis. The results show that exergy efficiency of mode 4 is the highest, 55.71%, and exergy density of mode 2 is the largest, 8.09 × 106 J m−3, when design parameters of system are identical. The second heat exchanger has the most improvement potential in elevating system performance. In addition, a parametric analysis and multi-objective optimization are also carried out to assess the effects of several key parameters on system performance.