Results 1 - 10 of 35626
Results 1 - 10 of 35626. Search took: 0.043 seconds
|Sort by: date | relevance|
[en] Highlights: • New Hybrid system coupling photovoltaic and thermoelectric are studied. • Thermal transfer Method. • The effect of coupling types which are direct and indirect are examined. • The Heat Transfer is modeled in Hybrid system. • The indirect coupling significantly improves the overall efficiency. - Abstract: Advanced photovoltaic devices with a high performance/cost ratio is a major concern nowadays. In the present study, we investigate the energetic efficiency of a new concept based on an indirect (instead of direct) photovoltaic and thermoelectric coupling. Using state-of-the-art thermal transfer calculations, we have shown that such an indirect coupling is an interesting alternative to maximize solar energy exploitation. In our model, a concentrator is placed between photovoltaic and thermoelectric systems without any physical contact of the three components. Our major finding showed that the indirect coupling significantly improve the overall efficiency which is very promising for future photovoltaic developments.
[en] Highlights: • Trigeneration technologies classified and reviewed according to prime movers. • Relevant heat recovery equipment discussed with thermal energy storage. • Trigeneration evaluated based on energy, exergy, economy, environment criteria. • Design, optimization, and decision-making methods classified and presented. • System selection suggested according to user preferences. - Abstract: Electricity, heating, and cooling are the three main components constituting the tripod of energy consumption in residential, commercial, and public buildings all around the world. Their separate generation causes higher fuel consumption, at a time where energy demands and fuel costs are continuously rising. Combined cooling, heating, and power (CCHP) or trigeneration could be a solution for such challenge yielding an efficient, reliable, flexible, competitive, and less pollutant alternative. A variety of trigeneration technologies are available and their proper choice is influenced by the employed energy system conditions and preferences. In this paper, different types of trigeneration systems are classified according to the prime mover, size and energy sequence usage. A leveled selection procedure is subsequently listed in the consecutive sections. The first level contains the applied prime mover technologies which are considered to be the heart of any CCHP system. The second level comprises the heat recovery equipment (heating and cooling) of which suitable selection should be compatible with the used prime mover. The third level includes the thermal energy storage system and heat transfer fluid to be employed. For each section of the paper, a survey of conducted studies with CHP/CCHP implementation is presented. A comprehensive table of evaluation criteria for such systems based on energy, exergy, economy, and environment measures is performed, along with a survey of the methods used in their design, optimization, and decision-making. Moreover, a classification diagram of the main CHP/CCHP system components is summarized. A general selection approach of the appropriate CCHP system according to specific needs is finally suggested. In almost all reviewed works, CCHP systems are found to have positive technical and performance impacts.
[en] Electricity supply technologies considered in global long term technology scenarios. Technological and economic parameters. Calculation of the cost of electricity of the different technologies. Role of fusion in future climate change mitigation scenarios
[en] In order to increase energy security, production of renewable energies has been highly promoted by governments around the world in recent years. The typical base of various policy instruments used for this purpose is gross energy output of renewable energy. However, we show that basing policy instruments on gross energy output will result in problems associated with energy waste, economic inefficiency, and negative environmental effects. We recommend using net energy output as the base to apply price or quantity measures because it is net energy output, not gross energy output, which contributes to energy security. The promotion of gross energy output does not guarantee a positive amount of net energy output. By basing policy instruments on net energy output, energy security can be enhanced and the above mentioned problems can be avoided.
[en] Considering the state of the art for standardization a simulation model for calculating the heating demand for buildings as well as the demand for energy and fuels for the heating system and its carbondioxide emissions is presented and illustrated by examples. (author)
[en] Highlights: • A novel methodology to estimate global wind energy potential is proposed. • Wind park suitability is constrained by land use and water depth. • Power production density is derived from energy conservation laws. • Maximum wind potential is dependent on minimum Energy Return on Investment. • Total potential is established between 700 and 100 EJ/year at EROImin from 5 to 12. - Abstract: Looking ahead to 2050 many countries intend to utilise wind as a prominent energy source. Predicting a realistic maximum yield of onshore and offshore wind will play a key role in establishing what technology mix can be achieved, specifying investment needs and designing policy. Historically, studies of wind resources have however differed in their incorporation of physical limits, land availability and economic constraints, resulting in a wide range of harvesting potentials. To obtain a more reliable estimate, physical and economic limits must be taken into account. We use a grid-cell approach to assess the theoretical wind potential in all geographic locations by considering technological and land-use constraints. An analysis is then performed where the Energy Return on Investment (EROI) of the wind potential is evaluated. Finally, a top-down limitation on kinetic energy available in the atmospheric boundary layer is imposed. With these constraints wind farm designs are optimized in order to maximize the net energy flux. We find that the global wind potential is substantially lower than previously established when both physical limits and a high cut-off EROI > 10 is applied. Several countries’ potentials are below what is needed according to 100% renewable energy studies.
[en] Results of analysis of about 30 sources (USA, Germany, Greece, Denmark, Israel, EEC) were used to distinguish some characteristic features of foreign legislation, concerning use of renewable energy sources
[ru]На основании результатов анализа около 30 истоников (США, ФРГ, Греция, Дания, Израиль и ЕЭС) выделены некоторые характерные элементы зарубежного законодательства в использовании возобновляемых энергетических ресурсов
[en] Highlights: • A new method for design of segmented TEG is proposed. • Optimal length ratios for output power and efficiency are different. • Material properties, geometry and heat transfer all need to be considered. • This method is approved to be accurate and time-efficient. - Abstract: A comprehensive method for indicating the length ratio of segmented thermoelectric generator (TEG) is proposed to increase the output power and thermoelectric conversion efficiency. It is found that for a segmented TEG, there is an optimal length ratio corresponding to the highest maximum output power or thermoelectric conversion efficiency, which is not only dependent on the material properties but also the heat transfer conditions and geometry structure. The optimal length ratios corresponding to the output power and thermoelectric conversion efficiency are different. This method is also validated, and the error is within a reasonable range, indicating that this method can be used accurately and time-efficiently for the design of segmented TEGs.
[en] Highlights: • Thermodynamic analysis is presented for a LAES system combined with packed bed units. • The LAES system round-trip efficiency is in the range 50–62%. • Cold box inlet temperature and discharge pressure have significant influence on system performance. • LAES system has smaller air storage volume and higher ASED compared with A-CAES system. - Abstract: Energy storage is a key technology required to manage intermittent or variable renewable energy, such as wind or solar energy. In this paper a concept of an energy storage based on liquid air energy storage (LAES) with packed bed units is introduced. First, the system thermodynamic performance of a typical cycle is investigated and temperature distribution in cold boxes is discussed. Then, the effects of inlet temperature of cold boxes, charge and discharge pressures on thermal behaviors of LAES system are analyzed, as well as the system round-trip efficiency. Finally, an overall comparison between this LAES system and an adiabatic compressed air energy storage (A-CAES) system is conducted. The system could achieve a round-trip efficiency in the range 50–62% depending on the values of process conditions. The system round-trip efficiency decreases with the increase of cold box inlet temperature, and increases with the rise of charge and discharge pressures. Although the round-trip efficiency of the present LAES system is a bit lower than the A-CAES system, however, the air storage volume decreases and the air storage energy density (ASED) increases remarkably for the same operational conditions. The main conclusions draw from this work is beneficial for future LAES development in particular the combination with the packed bed units and the fit with the requirements for large-scale energy storage.
[en] Aim: Policy-makers typically track the rapidly evolving U.S. residential photovoltaic (PV) market by relying on price data reported by PV installers/integrators to incentive programs. Recent years have witnessed a shift toward third-party-owned (TPO) business models, in which the absence of a cash purchase price obscures data interpretation. Appraisals—often based on estimates of the average fair market value across a diverse fleet of systems—are one way TPO prices are reported. Scope: This study investigates residential PV system price drivers to improve the accuracy, consistency, and relevance of PV price-tracking efforts. Our econometric approach evaluates system price drivers using California Solar Initiative data, controlling for system, installer, and geographic variables. Conclusions: We find that reported prices for confirmed appraised systems are $1.13/W higher than non-appraised systems and do not respond to hypothesized price drivers. For non-appraised systems, we find preliminary evidence of market distortions based on the impact of the incentive level, module cost and household income on reported price. Further, unspecified installer heterogeneity—possibly due to differences in products, cost structure or reporting practices—is a substantial price driver. Using estimates, we develop a price model to approximate non-appraised system prices. -- Highlights: •This analysis evaluates residential PV price drivers using an econometric model. •Reported prices for appraised systems are $1.13/W higher than non-appraised. •Reported prices for appraised systems do not respond to expected price drivers. •We find some evidence of market distortions in non-appraised systems. •Installer heterogeneity is a substantial price driver for all systems