Results 1 - 10 of 198963
Results 1 - 10 of 198963. Search took: 0.104 seconds
|Sort by: date | relevance|
[en] Highlights: • Trigeneration technologies classified and reviewed according to prime movers. • Relevant heat recovery equipment discussed with thermal energy storage. • Trigeneration evaluated based on energy, exergy, economy, environment criteria. • Design, optimization, and decision-making methods classified and presented. • System selection suggested according to user preferences. - Abstract: Electricity, heating, and cooling are the three main components constituting the tripod of energy consumption in residential, commercial, and public buildings all around the world. Their separate generation causes higher fuel consumption, at a time where energy demands and fuel costs are continuously rising. Combined cooling, heating, and power (CCHP) or trigeneration could be a solution for such challenge yielding an efficient, reliable, flexible, competitive, and less pollutant alternative. A variety of trigeneration technologies are available and their proper choice is influenced by the employed energy system conditions and preferences. In this paper, different types of trigeneration systems are classified according to the prime mover, size and energy sequence usage. A leveled selection procedure is subsequently listed in the consecutive sections. The first level contains the applied prime mover technologies which are considered to be the heart of any CCHP system. The second level comprises the heat recovery equipment (heating and cooling) of which suitable selection should be compatible with the used prime mover. The third level includes the thermal energy storage system and heat transfer fluid to be employed. For each section of the paper, a survey of conducted studies with CHP/CCHP implementation is presented. A comprehensive table of evaluation criteria for such systems based on energy, exergy, economy, and environment measures is performed, along with a survey of the methods used in their design, optimization, and decision-making. Moreover, a classification diagram of the main CHP/CCHP system components is summarized. A general selection approach of the appropriate CCHP system according to specific needs is finally suggested. In almost all reviewed works, CCHP systems are found to have positive technical and performance impacts.
[en] The RESAssess software is developed to assist in the preliminary assessment of potential renewable energy projects. The first release includes water pumping solar systems, passive solar systems, wind, and geothermal energy and biomass. The program guides the users in the design of their systems, by providing initial estimates. By changing the system’s parameters, users are able to quickly screen an effective technology and system size depending on load, climatic conditions, and season of use. This paper describes scope of models (radiation, wind, geothermal, heat transfer) used to predict energy production from energy resource systems, climatic variables and system parameters and software technology for realising the project. Keywords: Energy projects, Renewable energy, Web system
[en] Highlights: ► A solar desiccant cooling/heating system is simulation studied. ► The mean deviation is about 10.5% for temperature and 9.6% for humidity ratio. ► The 51.7% of humidity load and 76% of the total cooling can be handled. ► About 49.0% of heating load can be handled by solar energy. ► An optimization of solar air collector has been investigated. - Abstract: To increase the fraction of solar energy might be used in supplying energy for the operation of a building, a solar desiccant cooling and heating system was modeled in Simulink. First, base case performance models were programmed according to the configuration of the installed solar desiccant system and verified by the experimental data. Then, the year-round performance about the system was simulated. Last, design parameters of solar air collectors were optimized that include collector area, air leakage and thermal insulation. Comparison between numerical and experimental results shows good agreement. During the simulation, the humidity load for 63 days (51.7%) can be totally handled by the two-stage desiccant cooling unit. For seasonal total heating load, about 49.0% can be handled by solar energy. Based on optimized results, the thermal energy subsystem functioned to its expected performance in solar energy collection and thermal storage
[en] Highlights: • New Hybrid system coupling photovoltaic and thermoelectric are studied. • Thermal transfer Method. • The effect of coupling types which are direct and indirect are examined. • The Heat Transfer is modeled in Hybrid system. • The indirect coupling significantly improves the overall efficiency. - Abstract: Advanced photovoltaic devices with a high performance/cost ratio is a major concern nowadays. In the present study, we investigate the energetic efficiency of a new concept based on an indirect (instead of direct) photovoltaic and thermoelectric coupling. Using state-of-the-art thermal transfer calculations, we have shown that such an indirect coupling is an interesting alternative to maximize solar energy exploitation. In our model, a concentrator is placed between photovoltaic and thermoelectric systems without any physical contact of the three components. Our major finding showed that the indirect coupling significantly improve the overall efficiency which is very promising for future photovoltaic developments.
[en] Highlights: • Mode 4 has the highest exergy efficiency. • Mode 2 has the largest exergy density. • Second heat exchanger has the largest exergy destruction. - Abstract: Advanced adiabatic compressed air energy storage system plays an important role in smoothing out the fluctuated power from renewable energy. Under different operation modes of charge-discharge process, thermodynamic behavior of system will vary. In order to optimize system performance, four operation modes of charge-discharge process are proposed in this paper. The performance difference of four modes is compared with each other based on energy analysis and exergy analysis. The results show that exergy efficiency of mode 4 is the highest, 55.71%, and exergy density of mode 2 is the largest, 8.09 × 106 J m−3, when design parameters of system are identical. The second heat exchanger has the most improvement potential in elevating system performance. In addition, a parametric analysis and multi-objective optimization are also carried out to assess the effects of several key parameters on system performance.
[en] The manned deep-space exploration is a hot topic of the current space activities. The continuous supply of thermal and electrical energy for the scientific equipment and human beings is a crucial issue for the lunar outposts. Since the night lasts for periods of about 350 h at most locations on the lunar surface, massive energy storage is required for continuous energy supply during the lengthy lunar night and the in-situ resource utilization is demanded. A lunar based solar thermal power system with regolith thermal storage is presented in this paper. The performance analysis is carried out by the finite-time thermodynamics to take into account major irreversible losses. The influences of some key design parameters are analyzed for system optimization. The analytical results shows that the lunar based solar thermal power system with regolith thermal storage can meet the requirement of the continuous energy supply for lunar outposts. - Highlights: • A lunar based solar thermal power system with regolith thermal storage is presented. • The performance analysis is carried out by the finite-time thermodynamics. • The influences of some key design parameters are analyzed.
[en] Liquid desiccant systems have been paid attention because of its advantages in energy saving and an environmental friendliness. The use of liquid desiccant systems offers design and performance advantages over the solid desiccant systems, especially when solar energy is used for regeneration. The objective of this paper is to analyze the simultaneous heat and mass transfer characteristics of lithium chloride aqueous solution for the plate type dehumidification system. The effects of process air and solution inlet conditions on the dehumidification performance are studied in this study. It is found that the heat transfer coefficient of the air side gives much more significant effect on the absorption rate and dehumidification effectiveness than those of the solution and the coolant sides while the mass transfer coefficient of the solution side gives more significant effect than that of the air side. It is also found that the solution concentration is the most important factor for absorption performance improvement during the dehumidification process.
[en] The efficiency of materials developed for solar energy and technological applications depends on the interplay between molecular architecture and light-induced electronic energy redistribution. The spatial localization of electronic excitations is very sensitive to molecular distortions. Vibrational nuclear motions can couple to electronic dynamics driving changes in localization. The electronic energy transfer among multiple chromophores arises from several distinct mechanisms that can give rise to experimentally measured signals. Atomistic simulations of coupled electron-vibrational dynamics can help uncover the nuclear motions directing energy flow. Through careful analysis of excited state wave function evolution and a useful fragmenting of multichromophore systems, through-bond transport and exciton hopping (through-space) mechanisms can be distinguished. Such insights are crucial in the interpretation of fluorescence anisotropy measurements and can aid materials design. Finally, this Perspective highlights the interconnected vibrational and electronic motions at the foundation of nonadiabatic dynamics where nuclear motions, including torsional rotations and bond vibrations, drive electronic transitions.
[en] Highlights: • A technical solution to the power supply of wireless sensor networks is presented. • The low voltage produced by TEG is boosted from less than 1 V to more than 4 V. • An output current and voltage of TEG device is acquired as 21.47 mA and 221 mV. • The device successfully provides output power 4.7 mW in no electricity conditions. • The thermo-economic value of TEG device is demonstrated. - Abstract: Motivated by the limited power supply of wireless sensors used to monitor the natural environment, for example, in forests, this study presents a technical solution by recycling solar irradiation heat using thermoelectric generators. Based on solar irradiation and the earth’s surface-air temperature difference, a new type of thermoelectric power generation device has been devised, the distinguishing features of which include the application of an all-glass heat-tube-type vacuum solar heat collection pipe to absorb and transfer solar energy without a water medium and the use of a thin heat dissipation tube to cool the earth surface air temperature. The effects of key parameters such as solar illumination, air temperature, load resistance, the proportional coefficient, output power and power generation efficiency for thermoelectric energy conversion are analyzed. The results of realistic outdoor experiments show that under a state of regular illumination at 3.75 × 10"4 lx, using one TEG module, the thermoelectric device is able to boost the voltage obtained from the natural solar irradiation from 221 mV to 4.41 V, with an output power of 4.7 mW. This means that the electrical energy generated can provide the power supply for low power consumption components, such as low power wireless sensors, ZigBee modules and other low power loads
[en] Highlights: • A solar thermoelectric with micro-channel heat pipe system was presented. • Mathematical model of the system was built. • Experiment and the simulation were compared to verify the model. • Performance of the system with different factors was analyzed. - Abstract: Micro-channel heat pipe can convert the low heat flux to the high heat flux by changing the ratio of the evaporator area to the condenser area and has a higher heat transfer performance than the common heat pipe. Combining the solar concentrating thermoelectric generation with micro-channel heat pipe can save the quantity of thermoelectric generation and reduce the cost significantly. In this paper, a solar concentrating thermoelectric generator using the micro-channel heat pipe array was designed, and the mathematical model was built. Furthermore, the comparison of the experiment and the simulation between the solar concentrating thermoelectric generator using the micro-channel heat pipe array and the thermoelectric generations in series was made. In addition, the performance on the different areas of selective absorbing coating, different concentration ratios, different ambient temperatures, different wind speed all were analyzed. The outcomes showed the overall performance of the solar concentrating thermoelectric generator using the micro-channel heat pipe array system.