Results 1 - 10 of 2526
Results 1 - 10 of 2526. Search took: 0.027 seconds
|Sort by: date | relevance|
[en] The principle of 1-Wire bus protocol, the characteristics of digital temperature sensor DSISB20, humidity sensor DHT11 and the ultra low power mixed signal processor MSP430F149 are introduced, which combined with PC formed a precise collection system with 8 channel temperature and 1 channel humidity. (authors)
[en] The Wireless Sensor Network (WSN) is composed of a large number of sensor nodes with limited computation communication, and battery facilities. One of the common applications of this network is environment monitoring through sensing motion, measuring temperature, humidity and radiation. One of the basic activities in WSN is data gathering which represents a great challenge. Many routing protocols are proposed for that network to collect and aggregate the data. The most popular ones are hierarchy and data centric routing protocols. The main goal of this study is to identify the most preferable routing protocol, to be used in each mobility model. This paper studies the performance of LEACH (Low Energy Adaptive Clustering Hierarchy) from hierarchy routing protocol and direct diffusion from data centric routing protocol which is not clarified until now. Moreover, a comparison between LEACH and direct diffusion protocol using NS2 simulator will be made, and an analysis of these protocols will be conducted. The comparison includes packet delivery ratio, throughput, average energy ratio, average delay, network lifetime, and routing overhead. The performance is evaluated by varying the number of sensor nodes under three mobility models Reference Point Group Mobility Model (RPGM), Manhattan and random waypoint mobility model. Simulation results show that LEACH routing protocol has a good performance in RPGM and Manhattan than random waypoint mobility model. Direct diffusion has a good performance in random waypoint mobility model than in RPGM and Manhattan mobility model
[en] The contribution comprises analysis that is based on scientific work as a part of participation on the international research project carried out at the University of Prešov in Prešov and Vienna University of Technology entitled 'Detection and Management of Risk Processes in Building Insulation' and numbered SRDA SK-AT-0008-10. Statistical approach with correlations among humidity, time and temperature values in the space between the wall and building insulation uses the set of data obtained during the measurement series as testing using a new technology with equipment that does not influence the environment properties in the space. Therefore such real mapping can bring a real picture of possible condensation as a risk process in the building envelope.
[en] In the process of nuclear radiation measurement, often the results relied on measuring the temperature and humidity of the environment to compensate. The design of a low-cost simple temperature and humidity logger in the article, can achieve the measurements of temperature, humidity in the experimental nuclear environment. The system uses AT89 series low-cost MCU controller, domestic DHT11 temperature and humidity sensors, and RS485 protocol for remote data transfer and on-line monitoring of results. Experimental results show that the collector can achieve rapid multi-point measurements of temperature and humidity, the system is stable and reliable, is a low-cost solution, suitable for all kinds of nuclear measurement applications. (authors)
[en] In order to effectively hold the measuring point surroundings condition record information in nuclear fallout measuring instrument inside, the measurement data has more practical meaning, also facilitate comprehensive analysis and processing. It will have high sensitivity, low interference, easy to install characteristics of temperature and humidity, wind speed sensor and wind-direction sensors, rainfall sensor embedded into to MSP430F169 as the core of the nuclear instruments, realizing the environmental parameters of the acquisition, and in each sensor is introduced based on the theory of, will of communication between the microcontroller and sensor method and software and hardware design to do a detailed explanation. Experiments prove, the text of the design method is feasible, instrument completely can achieve in nuclear detection applications in the field of requirements. (authors)
[en] Laboratory investigations on pulsed current spreading from spherical electrodes and evolution of electrical breakdown of silica sand with different water contents under a 15–20 kV voltage pulse were carried out. A sharp nonlinear decrease in the pulsed resistance of soil was observed when the current density exceeded a certain threshold value. Then ionization-overheating instability develops and leads to current contraction and plasma channel formation in the soil. The method for determination of the threshold electric field for ionization is proposed. Electrical discharge in wet sand was found to develop with a significant delay time for long discharge gaps similar to thermal breakdown. (paper)
[en] In this study, a parametric study was performed for the spraying technique used to fabricate polystyrene (PS) superhydrophobic surfaces. The spraying distance, the spraying time and the polymer concentration were selected as the parameters to be varied. Tetrahydrofuran (THF) was used for the solvent. First, a dissolved PS solution in THF was prepared. Then, the dissolved PS solution was sprayed onto the coverglass. The Nozzle size, working pressure, glove box temperature and humidity were fixed at 0.2 mm, 0.2 MPa, 23.15±0.83 .deg. C and 54.13±1.46%, respectively. After that, the surface morphology of the sprayed surface and water contact angle (WCA) were assessed by Scanning electron microscopy (SEM) and a contact angle meter. According to the spraying distance increased, the WCA was decreased in all three cases of the 1.5 vol% PS solution. However, the WCA was approximately 158 .deg. regardless of the spraying time or distance in all three cases of 6.0 vol% PS solution. The amount of PS deposited per unit area was shown to be the key parameter in determining the hydrophobicity, as expected. However, the PS concentration and the spraying distance affected the hydrophobicity regardless of the amount of PS deposited. Additionally, using least-squares method of the Origin 8.1 program fitting procedures for the WCA results, a water-contact-angle map of the PS-sprayed specimen was generated within the experimental parameters.
[en] Cirrus clouds are ubiquitous in the upper troposphere and still constitute one of the largest uncertainties in climate predictions. Our paper evaluates cloud-resolving model (CRM) and cloud system-resolving model (CSRM) simulations of a midlatitude cirrus case with comprehensive observations collected under the auspices of the Atmospheric Radiation Measurements (ARM) program and with spaceborne observations from the National Aeronautics and Space Administration A-train satellites. The CRM simulations are driven with periodic boundary conditions and ARM forcing data, whereas the CSRM simulations are driven by the ERA-Interim product. Vertical profiles of temperature, relative humidity, and wind speeds are reasonably well simulated by the CSRM and CRM, but there are remaining biases in the temperature, wind speeds, and relative humidity, which can be mitigated through nudging the model simulations toward the observed radiosonde profiles. Simulated vertical velocities are underestimated in all simulations except in the CRM simulations with grid spacings of 500 m or finer, which suggests that turbulent vertical air motions in cirrus clouds need to be parameterized in general circulation models and in CSRM simulations with horizontal grid spacings on the order of 1 km. The simulated ice water content and ice number concentrations agree with the observations in the CSRM but are underestimated in the CRM simulations. The underestimation of ice number concentrations is consistent with the overestimation of radar reflectivity in the CRM simulations and suggests that the model produces too many large ice particles especially toward the cloud base. Simulated cloud profiles are rather insensitive to perturbations in the initial conditions or the dimensionality of the model domain, but the treatment of the forcing data has a considerable effect on the outcome of the model simulations. Despite considerable progress in observations and microphysical parameterizations, simulating the microphysical, macrophysical, and radiative properties of cirrus remains challenging. Comparing model simulations with observations from multiple instruments and observational platforms is important for revealing model deficiencies and for providing rigorous benchmarks. But, there still is considerable need for reducing observational uncertainties and providing better observations especially for relative humidity and for the size distribution and chemical composition of aerosols in the upper troposphere.
[en] Pressure agglomeration of powders is widely applied in various industries and an increasing interest lies in the identification and description of contact mechanisms between particles, which are responsible for the compaction product properties. In this paper, the design and development of a novel micromanipulation particle tester (MPT) is presented. This device makes it possible to measure the deformation kinetics and resulting adhesion of two individual particles in contact under load, which are strongly influenced by the applied process conditions. The MPT set-up is, therefore, designed to offer a unique control over the process conditions most relevant to the compaction of powders: external stress, dwell or holding time at constant deformation, compression velocity as well as relative humidity and temperature determining the physical state and mechanical characteristics of hygrosensitive amorphous particles. The latter are often part of powder formulations, e.g. in the food industry, and have been used for force and contact-zone development studies with the MPT. The experimental results on the microscale level will deliver valuable quantitative information for an improved tailoring of pressure agglomeration process conditions of bulk solids. (paper)
[en] During the electro spinning process the web of nano fibres is manufactured by means of electrostatic forces between two electrodes. The diameters of nano fibres usually differ and they depend on various parameters. The different fineness of fibres influences the structure of the web and herewith the end-use properties of such kind of nano material. Analysis of nano fibres diameters distribution also shows big differences; even more, the distributions are not spread along the normal distribution. Understanding the influence of electro spinning parameters and the reason why the shapes of distributions are so sophisticated is very important. The goal of this paper is to analyse the distribution of diameter and to propose the new criterion for nano fibres diameter comparison and web of nano fibres estimation. In this paper the influence of covering time of support material on structure of PA6.6 nano fibre web has been investigated. It was estimated that this parameter does not have a significant influence on the average diameter of nano fibres, and only the structure of web has been influenced by the changes in covering time. According to the results provided the phenomena of nano fibres sticking on the support material at the time of electro spinning can be proved and explained.