Results 1 - 10 of 92
Results 1 - 10 of 92. Search took: 0.015 seconds
|Sort by: date | relevance|
[en] This paper presents a study on the regeneration performance characteristics of an internally heated regenerator applicable to a liquid desiccant system. The internally heated regenerator used in this study was designed and manufactured to provide better regeneration performance. An experimental setup was established to examine the regeneration performance. LiCl aqueous solution was used as working fluid. Variables to evaluate regeneration performance characteristics of the internally heated regenerator were dry bulb temperature, relative humidity and velocity of regeneration air, mass flow rate, temperature and concentration of the LiCl aqueous solution. The experimental conditions were chosen by using a 1/2 fractional factorial DOE. Regeneration rate and regeneration effectiveness were taken as results. From the results, solution concentration and regeneration air relative humidity have strong effects on the regeneration rate. The regeneration effectiveness was affected mostly by regeneration air velocity.
[en] A method and apparatus are disclosed for continuously drying and regenerating ceramic beads for use in process gas moisture drying operations such as glove boxes. A microwave energy source is coupled to a process chamber to internally heat the ceramic beads and vaporize moisture contained therein. In a preferred embodiment, the moisture laden ceramic beads are conveyed toward the microwave source by a screw mechanism. The regenerated beads flow down outside of the screw mechanism and are available to absorb additional moisture
[en] Highlights: • A ground-coupled desiccant assisted air conditioning system is evaluated experimentally. • The evaluation is carried out for steady state operation and the cooling period as a whole. • The suitability of the system to provide comfort conditions is examined demonstrated. • Energy comparisons with other air-conditioning systems are performed. • The performance of the borehole heat exchangers for cooling is evaluated. - Abstract: In a pilot installation at Hamburg University of Technology the coupled operation of an open cycle desiccant assisted air conditioning system with borehole heat exchangers is investigated. The paper presents experimental data recorded during the cooling period 2014. Results show that the electricity demand of the system can be reduced to the parasitic consumption of the fans, wheels and pumps. An electric energy efficiency ratio of 6.63 is achieved, enabling electricity savings of more than 70% compared to a conventional reference system and 54% compared to a desiccant assisted hybrid system relying on an electric chiller. Comfort conditions can be maintained during the whole cooling period. The borehole heat exchangers work highly efficient, exhibiting a seasonal performance factor of 192.
[en] Regenerator is major component of liquid desiccant regeneration system. The influence of operating parameters; air flow rate, solution flow rate and concentration of desiccant is investigated experimentally on the performance parameters; outlet specific humidity, evaporation rate, air outlet temperature, mass transfer coefficient and effectiveness of the regenerator. Air and desiccant solution flow in counter direction with celdek pads as packing material. It is concluded that evaporation rate increases with increasing solution temperature, air flow rate and solution flow rate whereas same decreases with increasing concentration of desiccant. The effectiveness of regenerator is increased by 99 % with increase in air flow rate. A comparison of present finding with those available in the literature is presented in the last. Simulation results have revealed good agreement between the present experimental results.
[en] A draft Method of Test (MOT) has been proposed for packaged, air-to-air, desiccant-based dehumidifier systems that incorporate a thermally-regenerated desiccant material for dehumidification. This MOT is intended to function as the ''system'' testing and rating compliment to the desiccant ''component'' (desiccant wheels and/or cassettes) MOT (ASHRAE 1998) and rating standard (ARI 1998) already adopted by industry. This draft standard applies to ''packaged systems'' that: Use desiccants for dehumidification of conditioned air for buildings; Use heated air for regeneration of the desiccant material; Include fans for moving process and regeneration air; May include other system components for filtering, pre-cooling, post-cooling, or heating conditioned air; and May include other components for humidification of conditioned air. The proposed draft applies to four different system operating modes depending on whether outdoor or indoor air is used for process air and regeneration air streams . Only the ''ventilation'' mode which uses outdoor air for both process and regeneration inlets is evaluated in this paper. Performance of the dehumidification system is presented in terms that would be most familiar and useful to designers of building HVAC systems to facilitate integration of desiccant equipment with more conventional hardware. Parametric performance results from a modified, commercial desiccant dehumidifier undergoing laboratory testing were used as data input to evaluate the draft standard. Performance results calculated from this experimental input, results from an error-checking/heat-balance verification test built into the standard, and estimated comparisons between desiccant and similarly performing conventional dehumidification equipment are calculated and presented. Some variations in test procedures are suggested to aid in analytical assessment of individual component performance
[en] Goal of this contribution is to draw a picture about some general issues for using solar thermal energy for air conditioning of buildings. The following topics are covered:-A basic analysis of the thermodynamic limits for the use of heat cooling in combination with solar thermal energy is drawn; thereby fundamental insights about control needs for solar thermal driven cooling are obtained. -A short overview about the state-of-the-art of available technologies, such as closed thermal driven cooling cycles (e.g., absorption, adsorption) and open cooling cycles (e.g., desiccant employing either solid or liquid sorbents) is given and needs and perspectives for future developments are described. -The state-of-the-art of application of solar assisted air-conditioning in Europe is given and some example installations are presented. -An overview about new developments of open and closed heat driven cooling cycles for application in combination with solar thermal collectors is given and some of these new systems are outlined more in detail
[en] A man-portable personal cooling garment based on the concept of vacuum desiccant cooling (VDC) was developed. It was demonstrated with cooling pads that a cooling capacity of 373.1 W/m2 could be achieved in an ambient environment of 37 °C. Tests with human subjects wearing prototype cooling garments consisting of 12 VDC pads with an overall weight of 3.4 kg covering 0.4 m2 body surface indicate that the garment could maintain a core temperature substantially lower than the control when the workload was walking on a treadmill of 2% inclination at 3 mph. The exercise was carried out in an environment of 40 °C and 50% relative humidity (RH) for 60 min. Tests also showed that the VDC garment could effectively reduce the metabolic heat accumulation in body with subject wearing heavily insulated nuclear, biological and chemical (NBC) suit working in the heat and allow the participant to work safely for 60 min, almost doubling the safe working time of the same participant when he wore NBC suit only. - Highlights: ► Heat stress mitigation is important for workers health, safety, and performance. ► Vacuum desiccant cooling (VDC) a novel concept for personal cooling. ► VDC garment man-portable and more efficient than commercial ice/pad vest. ► VDC garment suitable for personal cooling with NBC suit.
[en] Highlights: ► Effects of irreversible processes on the performance of desiccant cooling cycle are identified. ► The exergy destructions involved are classified by the properties of the individual processes. ► Appropriate indexes for thermodynamic evaluation are proposed based on thermodynamic analyses. - Abstract: Thermodynamic analyses of desiccant cooling cycle usually focus on the overall cycle performance in previous study. In this paper, the effects of the individual irreversible processes in each component on thermodynamic performance are analyzed in detail. The objective of this paper is to reveal the elemental features of the individual components, and to show their effects on the thermodynamic performance of the whole cycle in a fundamental way. Appropriate indexes for thermodynamic evaluation are derived based on the first and second law analyses. A generalized model independent of the connection of components is developed. The results indicate that as the effectiveness of the desiccant wheel increases, the cycle performance is increased principally due to the significant reduction in exergy carried out by exhaust air. The corresponding exergy destruction coefficient of the cycle with moderate performance desiccant wheel is decreased greatly to 3.9%, which is more than 50% lower than that of the cycle with low performance desiccant wheel. The effect of the heat source is similar. As the temperature of the heat source increases from 60 °C to 90 °C, the percentage of exergy destruction raised by exhaust air increases sharply from 5.3% to 21.8%. High heat exchanger effectiveness improves the cycle performance mainly by lowering the irreversibility of the heat exchanger, using less regeneration heat and pre-cooling the process air effectively
[en] Graphical abstract: A heat pump driven, hollow fiber membrane-based two-stage liquid desiccant air dehumidification system. - Highlights: • A two-stage hollow fiber membrane based air dehumidification is proposed. • It is heat pump driven liquid desiccant system. • Performance is improved 20% upon single stage system. • The optimal first to second stage dehumidification area ratio is 1.4. - Abstract: A novel compression heat pump driven and hollow fiber membrane-based two-stage liquid desiccant air dehumidification system is presented. The liquid desiccant droplets are prevented from crossing over into the process air by the semi-permeable membranes. The isoenthalpic processes are changed to quasi-isothermal processes by the two-stage dehumidification processes. The system is set up and a model is proposed for simulation. Heat and mass capacities in the system, including the membrane modules, the condenser, the evaporator and the heat exchangers are modeled in detail. The model is also validated experimentally. Compared with a single-stage dehumidification system, the two-stage system has a lower solution concentration exiting from the dehumidifier and a lower condensing temperature. Thus, a better thermodynamic system performance is realized and the COP can be increased by about 20% under the typical hot and humid conditions in Southern China. The allocations of heat and mass transfer areas in the system are also investigated. It is found that the optimal regeneration to dehumidification area ratio is 1.33. The optimal first to second stage dehumidification area ratio is 1.4; and the optimal first to second stage regeneration area ratio is 1.286.
[en] Highlights: • Multi-objective optimization of desiccant wheels is investigated. • Response surface method is used for establishing novel regression models. • Effects of operating variables on corresponding responses are comprehensively evaluated. • Optimum values of input variables have been derived to minimize process outlet temperature and humidity ratio. • A valuable equation for determination of Pareto-optimal points has been proposed. - Abstract: A two-step computational framework based on the combination of response surface methodology and multi-objective optimization is proposed to model the outlet-air state of desiccant wheels and subsequently optimize their operation. Regeneration temperature, surface area ratio, rotational speed, and wheel diameter are considered as decision parameters in the genetic algorithm. The central composite design and response surface methods have been employed to design experiments, establish predictive empirical models, and determine interactive effects of decision variables on response variables—process outlet temperature and humidity ratio. Several experiments have been performed to verify applicability of the proposed methodology and validate obtained results. A value of the coefficient of determination exceeding 0.95 demonstrates high reliability and accuracy of the modeling process involved in the proposed methodology. Results obtained demonstrate greater dominance of the surface area ratio compared to other decision variables in terms of their influence on response variables. After successful validation against experimental data, the developed models have been considered as a combination of two objective functions. A fast and elitist non-dominated sorted genetic algorithm II-based optimization technique has been employed to simultaneously determine optimum values of decision variables. A Pareto-optimum front has been presented to select the best value of each decision parameter from available points of optimum operation, and a valuable equation for Pareto-optimal points has been deduced for each material to assist designers develop an optimum design of desiccant cooling systems.