Results 1 - 1 of 1
Results 1 - 1 of 1. Search took: 0.014 seconds
[en] Highlights: • The LiFePO4/porous graphene oxide/C was prepared by a hydrothermal method and a spray dry process. • The porous graphene oxide was prepared through an activation method. • The discharge capacity of the SP-LFP/1%PGO/C is 107 mAh g−1 after 1000 cycles at 10C rate. • The SP-LFP/PGO/C material shows promising candidate for high-power Li-ion battery in EV. - Abstract: A 3D spray-dried micro/mesoporous LiFePO4/porous graphene oxide/C (denoted as SP-LFP/PGO/C) composite material is synthesized via a three-step process, i.e., hydrothermal process, carbon coating, and spray dry method in sequence. The 2D porous graphene oxide (denoted as PGO) material is first prepared through an activation method. The galvanostatic charge-discharge measurements of LFP composites without graphene oxide, with 1 wt% graphene oxide, and 1 wt% PGO are conducted in the potential range of 2–3.8 V at various rates (0.1–10C). It is revealed that the SP-LFP/PGO/C material shows the best performance among three samples. The discharge capacities of the SP-LFP/PGO/C composites are observed to 160, 152, 151, 149, 144, 139, 127 mAh g−1 at 0.1C, 0.2C, 0.5C, 1C, 3C, 5C and 10C rate. In particular, the discharge capacity of the SP-LFP/PGO/C composite with 1 wt% PGO is 107 mAh g−1 after 1000 cycles at a 10C rate, and its capacity retention is ca. 97%. It is due to the unique structural and geometrical feature of SP-LFP/PGO/C composite, there the diamond-like (rhombus) LFP nanoparticles are embedded in porous GO matrix which forming a porous three-dimensional network for fast electronic and ionic transport channels.