Results 1 - 10 of 7696
Results 1 - 10 of 7696. Search took: 0.032 seconds
|Sort by: date | relevance|
[en] A 3D model for hierarchical biomimetic adhesive pads is constructed. It is based on the main principles of the adhesive pads of the Tokay gecko and consists of hierarchical layers of vertical or tilted beams, where each layer is constructed in such a way that no cohesion between adjacent beams can occur. The elastic and adhesive properties are calculated analytically and numerically. For the adhesive contact on stochastically rough surfaces, the maximum adhesion force increases with increasing number of hierarchical layers. Additional calculations show that the adhesion force also depends on the height spectrum of the rough surface
[en] Recently, engineering applications have started to adopt solutions inspired by nature. The peculiar adhesive properties of gecko skin are an example, as they allow the animal to move freely on vertical walls and even on ceilings. The high adhesive forces between gecko feet and walls are due to the hierarchical microscopical structure of the skin. In this study, the effect of metal coatings on the adhesive strength of synthetic, hierarchically structured, dry adhesives was investigated. Synthetic dry adhesives were fabricated using PDMS micro-molds prepared by photolithography. Metal coatings on synthetic dry adhesives were formed by plasma sputtering. Adhesive strength was measured by pure shear tests. The highest adhesion strengths were found with coatings composed of 4 nm thick layers of Indium, 8 nm thick layers of Zinc and 6 nm thick layers of Gold, respectively
[en] Gecko-like dry adhesive using high aspect ratio polymeric nanohairs has insuperable limitations, although it has huge potential in many applications. Repeated harsh contacts on a target substrate lead to physical collapse of nanohairs and significant degradation of the adhesion property, because the polymeric nanohairs are quite fragile due to poor mechanical robustness. Herein, we demonstrate a highly robust gecko-like dry adhesive with unidirectionally stooped polymeric nanohairs (diameter 100 nm) with a high aspect ratio (∼9) using an ultrathin metal coating. 100 cycles of repeated adhesion tests with 1 N preloading force did not significantly degrade adhesion or cause collapse of nanohairs. We believe that this approach allows gecko-like dry adhesive to be utilized in many related applications and diverse industry interests. (paper)
[en] A novel method to increase the adhesion strength of a gecko-inspired dry adhesive is presented. Gold nanoparticles are synthesized on the tips of the microfibrils of a polymeric dry adhesive to increase its Hamaker constant. Formation of the gold nanoparticles is qualitatively studied through a colour change in the originally transparent substance and quantitatively analysed using ultraviolet–visible spectrophotometry. A pull-off force test is employed to quantify the adhesion enhancement. Specifically, adhesion forces of samples with and without embedded gold nanoparticles are measured and compared. The experimental results indicate that an adhesion improvement of 135% can be achieved. (paper)
[en] In many instances, a climbing robot that utilizes dry adhesives as an attachment method may be found to be very useful due to the inherent nature of biomimetic fibrillar dry adhesives in the applications of space, security, surveillance and nuclear reactor cleaning and maintenance. In this paper, a novel tank-like modular robot is developed that does not require a tail to provide a preload to the front of the robot while climbing. Biomimetic fibrillar dry adhesives with mushroom caps manufactured into belts are used as an attachment method. The manufacturing of the dry adhesive belts is discussed and the adhesion properties are examined. The timing belt based climbing platform (TBCP-II) utilizes two tank-like modules connected with an active joint with continual surface–robot distance measuring providing feedback for active adhesive preloading. The mechanical, electronic and software design is discussed. Reliable vertical surface climbing is achieved and the preloading strategy and response is examined. TBCP-II is shown to be capable of both horizontal to vertical and vertical to horizontal surface transfers over both inside and outside corners
[en] The inequalities which must be satisfied the characteristics of elastic state of the materials of contacting bodies at their adhesion (coalescence) and its absence (antiadhesion) were obtained. These are the result of the analysis of adhesion phenomena and its absence. The analysis is made on the basis of a special variant of a nonlocal theory of elasticity. Its main hypothesis is infinitely small particles of the continuous elastic medium interact with each other at finite distances with the help of many-particle potential forces. The results of using criterial inequalities were confirmed by known experimental data. (paper)
[en] Polytetrafluoroethylene (PTFE), a frequently utilized polymer for the fabrication of synthetic vascular grafts, was surface-modified by means of a wet-chemical process. The inherently non-cell-adhesive polymer does not support cellular attachment, a prerequisite for the endothelialization of luminal surface grafts in small diameter applications. To impart the material with cell-adhesive properties a treatment with sodium-naphthalene provided a basis for the subsequent immobilization of the adhesion promoting RGD-peptide using a hydroxy- and amine-reactive crosslinker. Successful conjugation was shown with cell culture experiments which demonstrated excellent endothelial cell growth on the modified surfaces.
[en] During the last few years several research groups have focused on the fabrication of artificial gecko inspired adhesives. For mimicking these structures, different polymers are used as structure material, such as polydimethylsiloxanes (PDMS), polyurethanes (PU), and polypropylene (PP). While these polymers can be structured easily and used for artificial adhesion systems, the effects of repeated adhesion testing have never been investigated closely. In this paper we report on the effect of repeated adhesion measurements on the commercially available poly(dimethylsiloxane) polymer kit Sylgard 184 (Dow Corning). We show that the adhesion force decreases as a function of contact cycles. The rate of change and the final value of adhesion are found to depend on the details of the PDMS synthesis and structuring.
[en] Digital micromirror device (DMD) is the core of digital light processing projected display technology wherein the spring tip-landing site adhesion and wear are the substantial clause leading to failure due to frequent contacts. In an attempt to analyze the adhesive force between the spring tip and the landing site, two main aspects are considered: i.e. the meniscus force and the viscous resistance during separation. The simulation results show that the influences of the surface energy, liquid volume and the separate velocity are prominent. The work will provide some hints for control of adhesive force in DMD components.
[en] Ciass lonomer cement is considered to be a recent material used for restoring teeth. It was launched on the market since 1971. Studies show that 86.4% of dentists use this material and also 71 % of dentists use it only for cementing restorations and crowns for its chemicaly bonding properties. In this paper, the adhesive properties were tested in two kinds of extracted human teeth. First group, recently extracted teeth well preserved in saline and the second group, teeth extracted and preserved in formaline for many years. There was no significant difference in the adhesion between the two groups. The Japanese Fuji showed more adhesion to the recently extracted teeth. (author)