[en] The superconducting magnets for the accelerator's rings will be cooled by a forced flow supercritical helium system from a central refrigeration plant. The design temperature for these magnets varies from 2.6 to 3.8₀K depending on a magnet's location in the ring. This paper describes the forced flow cooling system for testing a prototype magnet near 2.6₀K; this lowest temperature being of special interest to evaluate magnet quench protection. The test forced flow cooling system uses a three-stage approach, including an ejector pumped bath, similar to a cycle described previously. The coolant exists at 3.8₀K from these first stages and is then cooled further in a 64 cm diameter by 3 m high shielded liquid helium dewar. The supercritical helium gas passes through a submerged copper coil in this bath which is pumped to a pressure of 65 mm absolute by a screw compressor system. Temperatures are measured by thermistors located in the gas stream, and also embedded in the magnet coil