Filters
Results 1 - 1 of 1
Results 1 - 1 of 1.
Search took: 0.022 seconds
AbstractAbstract
[en] Because of economic and quality securing reasons a constant wall thickness of extruded pipes in circumference and extrusion direction is an important production aim. Therefore a microcomputer controlled system was developed, which controls die centering with electric motors. The control of wall thickness distribution; was realized with two conceptions: a dead time subjected control with a rotating on line wall thickness measuring instrument and an adaptive control with sensors in the pipe die. With a PI-algorithm excentricities of 30% of the wall thickness could be controlled below a trigger level of 2% within three dead times. (orig.)
[de]
Bei der Rohrextrusion ist die Konstanz der Wanddicke in Umfangs- und Extrusionsrichtung aus wirtschaftlichen und qualitaetssichernden Gruenden ein wichtiges Produktionsziel. Dazu wurde eine mikrorechnergesteuerte Zentrierregelung ueber ein mit Elektromotoren gesteuertes Werkzeug entwickelt. Die Regelung erfolgt mit einem rotierenden On-Line-Wanddickenmessgeraet sowie eine adaptive Regelung ueber Sensoren im Rohrkopf. Mit einem PI-Algorithmus konnten Exzentrizitaeten von 30% der Wanddicke innerhalb von drei Totzeiten unter eine Ansprechschwelle von 2% geregelt werden. (orig.)Original Title
Kontinuierliche Dickenregelung von extrudierten Rohren mit Hilfe von Mikrorechnern
Primary Subject
Secondary Subject
Source
Jun 1983; 64 p; CONTRACT 0264519-DVF 0901; With 26 figs., 26 refs.
Record Type
Report
Report Number
Country of publication
Reference NumberReference Number
INIS VolumeINIS Volume
INIS IssueINIS Issue