[en] The code calculates the variation in space and time of all significant fuel rod variables, including fuel, gap and cladding temperature, fuel and cladding deformation, cladding oxidation and rod internal pressure. The code combines a transient 2-dimensional heat conduction code and a 1-dimensional mechanical model for the cladding deformation. The first sections of this report deal with the heat conduction model and the finite element discretization used for the thermal analysis. The mechanical deformation model is presented next: modelling of creep, phase change and oxidation of the zircaloy cladding is discussed in detail. A model describing the effect of oxidation and oxide cracking on the mechanical strength of the cladding is presented too. Next a mechanical restraint model, which allows the simulation of the presence of the neighbouring rods and is particularly important in assessing the amount of channel blockage during a transient, is presented. A description of the models used for the coolant conditions and for the power generation follows. The heat source can be placed either in the fuel or in the cladding, and direct or indirect clad heating by electrical power can be simulated. Then a section follows, dealing with the steady-state and transient types of calculation and with the automatic variable time step selection during the transient. The last sections deal with presentation of results, graphical output, test problems and an example of general application of the code