[en] A uranium-6 niobium alloy was shown to exhibit superplasticity. A thermomechanical processing (TMP) sequence was used to develop the ultrafine grain size essential for superplastic behavior. Strain-rate sensitivity, maximum elongation, and flow curve data indicated that this alloy is superplastic above the monotectoid temperature (647 C) in the equilibrium γ₁, single-phase, temperature regime. The existence of superplasticity in the single-phase temperature regime was explained by the presence of metastable γ₂ at these higher temperatures. Sluggish niobium diffusion and the resultant slow dissolution kinetics were shown to be responsible for this anomalous-single-phase superplastic behavior. An engineering elongation of 658 pct was obtained at 685 C for a constant true strain rate of 2.5 x 10^-4 s^-1, which required an initial flow stress of only 2.8 MPa. A grain growth kinetic study, along with flow curve information, has also shown that superplastic forming (SPF) must be completed within 2 hours at 670 C to obtain maximum ductility with the lowest forming pressure