[en] In Scandinavia seismic activity is generally low. Only a few incidents have been registered in historic time, which might have damaged an industrial plant of today. There has been no earthquakes in Sweden strong enough to affect a NPP during our nuclear era (and not for very long time before either). So the risk for an nuclear accident i Sweden, caused by an earthquake, may thus be considered to be low. The basis and the methodology used in the design of Forsmark 3 and Oskarshamn 3 with respect to seismic safety is not in all parts suited to be employed for the older reactors. The methods implies a number of simplifications which may be a practical approach in connection with a new design but which might cause too conservative judgements of existing designs. The development of methods is therefore a vital part in the analysis. The Swedish nuclear Power Inspectorate (SKI), Vattenfall AB, Sydkraft AB and Oskarshams Kraftgrupp AB (OKG) have performed such a development of methods in a joint research program: 'Project Seismic Safety'. The aim of the project was to develop methods for calculating the ground response to be used in the safety analysis of nuclear power plants in Sweden, as well as to demonstrate its application to the power plants at Ringhals and Barseback. The study also included a survey of geological and seismological conditions in the regions around the power plants studied. Since the large scale geological and seismological conditions around the individual nuclear plant sites are not very different as regards their expected effects on the seismic ground motion, the results obtained for the 'typical hard rock site' can be taken as a basis for the characterization of the ground motions at the individual sites, after appropriate transformations to account for specific load conditions, seismological as well as geological. (J.P.N.)