[en] The Waste Isolation Pilot Plant (WIPP) is a planned geologic repository for permanent disposal of transuranic waste generated by US government defense programs. Located near Carlsbad in southeastern New Mexico, the facility's disposal regions are mined from the bedded salt of the Salado Formation at a depth of approximately 652 m. Four shafts service the operational needs of the facility for air intake, exhaust, waste handling and salt handling. These shafts range in diameter from 3.5 to 6.1 m and extend from the ground surface to the repository. During repository closure, following an operational life of approximately 50 years, these shafts will be sealed in accordance with an acceptable design. Under contract to the US Department of Energy (DOE), the Repository Isolation Systems Department (RISD) of Sandia National Laboratories has developed a design for the WIPP shaft sealing system. This design has been reviewed by the US Environmental Protection Agency (EPA) as part of the 1996 WIPP Compliance Certification Application (CCA). An effective shaft sealing system for the WIPP will limit liquid and gas flows, and permanently prevent the migration of radiological or other hazardous constituents through the sealed shafts from repository to accessible environment. Because of these performance objectives, a significant effort has been directed toward evaluation of the seal design. Whereas RISD (1996) provides a comprehensive discussion, this paper focuses on only one aspect of the evaluation effort, namely a full shaft, fluid flow model