[en] The Endcap Cryostat will be supported by the End Barrel Tilecalorimeter at four points. The outer support points will be carried by a structure that is external to the End Barrel modules while the inner support points will be directly on the modules. This paper concerns the design of these inner support points. The design parameters for the inner support points are: (1) must be able to support twice the front load from the Endcap Cryostat (70 tons); (2) the support point must make contact on the inner radius surface provided on the Endcap Cryostat; (3) vertical adjust must be allowed of up to ± 6mm; (4) the support must be a simple support; (5) the support must be contained within the envelope of one End Barrel submodule