[en] The C V-28 cyclotron at IPEN-CNEN/S P is used mainly for radioisotope production to be utilized in nuclear medicine for diagnostic purposes. Among these radioisotopes we can cite ⁶⁷ Ga and ¹¹¹ In, which are obtained by irradiation of Zn and Cd solid targets. Up to now, the irradiations were performed in the external beam line, which has limitations in beam current due to the extraction system, that can at best extract between 50 and 70% of the produced beam. This is a critical point for an efficient radioisotope production. A possible solution to achieve high beam currents is a system that allows the irradiation of these solid targets with the internal beam. In this case, the total produced beam can be used. For this, the objective of this work was to modify and improve the internal target system of the C V-28 Cyclotron, which had three critical points in the original project, that made the system useless. First, the transport of the target to the irradiation position was modified: the pneumatic tube was changed to a motor drive service. Secondly, the target cooling system was improved. Third and the most critical, the modification on the locking system of the target holder that could bring the cyclotron tank to atmosphere. These modifications implied on a change in all logical sequence of the target control. With these modifications the system became more versatile and showed more reproducibility and reliability than the original internal target system. The loss of mass in natural Zn targets irradiated with currents up to 80 μA was negligible. The production yield of ⁶⁷ Ga obtained, at EOB, was 21.2 MBq/μAh (0.57 mCi/μAh), that is in good agreement with those obtained in the irradiation with external beams. (author)