[en] The Spent Fuel Disassembling Process Mockup(SFDPM) test facility is used for developing and testing a mechanical head end process of spent fuel, by using the PWR fuel assembly mockup. In the SFDPM test facility various equipment are installed including a rod extraction, cutting, decladding device, and a skeleton compaction device. The head end process of spent fuel assembly is used for the process of the spent fuel reuse and also, used for the interim storage process. In the SFDPM, the remote handling and control technology is developed and tested to establish the head end process. A robot manipulator is attached to the telescopic tube installed at the trolley which is movable into X and Y direction. The manipulator is used for remotely handling and transporting fuel rods, bottom nozzles, and skeletons, etc. Also, it is used for remotely cutting guide tubes in order to remove top nozzle. This paper shows the experimental results of remote handling in the SFDPM