[en] Corrosion products in the secondary side of pressurized water reactor (PWR) steam generators (SGs) primarily deposit on the SG tubes. These deposits can inhibit heat transfer, lead to thermal-hydraulic instabilities through blockage of tube supports, and create occluded regions where corrosive species can concentrate along tubes and in tube-to-tube support plate crevices. The performance of the SGs is compromised not only by formation of an insulating scale, but by the removal of tubes from service due to corrosion. A potential strategy for minimizing deposition of corrosion products on SG internal surfaces is to use an online dispersant to help prevent the corrosion products from adhering to the steam generator surfaces. By inhibiting the deposition of the corrosion products, the dispersant can facilitate more effective removal from the SGs via blowdown. This type of strategy has been employed at fossil boilers for many decades. However, due to the use of inorganic (sulfur and other impurities) polymerization initiators, polymeric dispersants had not been utilized in the nuclear industry. Only recently has a poly-acrylic acid dispersant, developed by BetzDearborn (PAA), been available that meets the criteria for nuclear application. This paper summarizes the results of the short-term PAA dispersant trial in Winter/Spring 2000, lasting approximately 3 months, performed at Arkansas nuclear one unit 2 (ANO-2)-including the chronology of the trial, the increase in blowdown iron removal efficiency with use of the dispersant, and observed effects on SG performance. (authors)