[en] New design improvements for an ITER equatorial EC launcher are described. A design of the front shield modules was evaluated analytically. The results indicate that these modules can withstand the electromagnetic forces induced by plasma disruption and vertical plasma motion. The steering mirror mock-up including the spiral cooling tubes was fabricated based on the present design with application of the hot isostatic pressing technique to bond the copper alloy mirror body and the embedded stainless steel cooling tubes. The test of water flow was carried out and the expected flow rate was successfully obtained. A quasi-optical (QO) transmission layout has been proposed instead of the waveguide lines. The advantage of this option is possibly to increase the reliability in terms of fabrication and refurbishment. According to the beam propagation analysis, it is verified that transmission loss at the QO region is 1.1%-2.2%, which is comparable to the reference design. The peak heat load on the steering mirror surface could be reduced by 55%, which relaxes the mirror design