[en] World is suffering from severe energy crisis and require an efficient renewable energy source. To meet global energy demands, the conservation of renewable energy sources is inevitable. Significant renewable energy can be produced from organic matter that is otherwise considered waste in the form of clean bioelectricity.A less mediator plant microbial fuel cell designed for comparative analysis, power density of two different electrodes; Nickel and Graphite and tested using different local salt marsh grass species Sporobolasarabicus and Cynodondactylon. Both electrodes generated the power density of 23 mW/m2 and 10.7 mW/m2 respectively without using feed solution. In other experiments using feed solution, the power output was also recorded during the period of two months. The maximum power density recorded as 120 mW/m2 and 58mW/m2 respectively from S. arabicus and C. dactylon species. Electrodes coupling with same or different electrode materials checked and current voltage relationship with power recorded before and after the application of plant nutrient solution from 1-8th weeks. Maximum current voltage relationship with power measured around 4-6th week for different electrodes and plant species. Graphite proved best electrode material as compared to Nickel for production of electricity.Two conditions existed in the single chamber configuration, one in which cathode was placed inside the soil near roots to consume oxygen and other was to improve power enhancement using plant nutrient solutions. Ohmic resistance and mass transfer losses could be decreased using membrane-less configuration that in fact makes it cost effective because membrane is the primary cost of plant microbial fuel cell. The main reason for not using membranes that the concentration of oxygen decreases very much in the depth of water or sediment which reduces the need for a membrane. Moreover, the soil or sediment might filter oxygen, acts as PEM and the redox potential of soil also decreases. (author)