[en] III–V ternary alloys semiconductor materials, in particular Ga_1_−_xIn_xSb, are ideal candidates for device substrates because of the possibility to define the lattice constant as a function of the third element, indium. Aluminum, an isoelectric dopant for Ga and In, increases the carrier mobility in GaSb crystals and has influence over the concentration of native defects by passivating and/or compensating them. To understand the influence of Al on the distribution of indium in ternary alloys of Ga_0_._8In_0_._2Sb, pure and doped ingots were obtained with approximately 10"2"0 atoms/cm"3 of Al using a vertical Bridgman system. Analysis by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX), X-ray diffraction (XRD), particle induced X-ray emission (PIXE) and particle induced gamma ray emission (PIGE) were used to obtain information on the structure defects and chemical composition of the crystals. The doped ingots showed good structural homogeneity when compared with the undoped alloy, and they were free from cracks and micro cracks. All of the obtained ingots present precipitates, twins and grains with different concentrations of In. The small compositional variation observed in the doped ingots along the radial direction (measured by PIXE), may be related to the solid–liquid interface’s quasi-equilibrium behavior. Regarding to the growth direction, it was observed that the undoped ingots exhibit a higher segregation phenomenon of the third element than the doped ingots. The obtained results indicate that aluminum influences the indium distribution in the ingots, thus ternary ingots with more homogeneous composition can be obtained and consequently electrical properties improved.