Filters
Results 1 - 1 of 1
Results 1 - 1 of 1.
Search took: 0.013 seconds
Dobák, Samuel; Füzer, Ján; Kollár, Peter, E-mail: samuel.dobak@student.upjs.sk2017
AbstractAbstract
[en] Highlights: • A comprehensive approach to magnetization dynamics in dual-phase compacted ferromagnets under elevated temperature. • A quantitative decomposition of broadband energy loss into magnetic domain walls and magnetization rotation components. • Increased temperature can significantly affect the domain walls movement, while rotational part remains unaffected. • An elucidation of dynamic magnetic response in terms of reversible anisotropy removal. This study examines the effect of operating temperature (from 23 °C to 110 °C) on broadband (from 1 Hz to 1 MHz) fluxmetrically obtained complex permeability spectra and energy loss in a set of dual-phase compacted soft magnets composed of pulverized alloys Co56Fe16Zr8B20 and Fe72.5Cu1Nb2Mo2Si15.5B7 consolidated in supercooled liquid conditions for CoFeZrB alloy constituent. The investigated samples differ in mass ratio of these two constituents (from 10 wt.% to 50 wt.% of FeCuNbMoSiB). The complete loss separation into the components produced by domain walls and magnetization rotation is performed. It is found that domain walls in such type of materials are fully relaxed beyond several kHz. Further analysis suggests that the domain wall movement is easier in materials subjected to higher temperatures as a result of reversible removal of a part of anisotropy. Nevertheless, the rotation contribution is temperature independent. In cores with lower content (10 wt.%) of FeCuNbMoSiB, temperature of 100 °C causes an increase in low-frequency (100 Hz) real permeability by 15%, while at higher amount (50 wt.%) only by 4% with respect to room temperature.
Primary Subject
Source
S0264127516313946; Available from http://dx.doi.org/10.1016/j.matdes.2016.11.007; Copyright (c) 2016 Elsevier Ltd. All rights reserved.; Country of input: International Atomic Energy Agency (IAEA)
Record Type
Journal Article
Journal
Materials and Design; ISSN 0264-1275;
; v. 114; p. 383-390

Country of publication
Reference NumberReference Number
INIS VolumeINIS Volume
INIS IssueINIS Issue