Filters
Results 1 - 1 of 1
Results 1 - 1 of 1.
Search took: 0.015 seconds
AbstractAbstract
[en] Automatic translation: 1. Introduction: Mixed oxide cores coated as part of the project were developed by HOBEG a decisive step towards reducing the contamination of HTI-BISO particles with 400 μm (Th, U) O2 cores done. The contamination of the HTI layer for the new particles is only about 140 x 10 - 6 U / Uges, while the contamination of the THTR standard particles is 600-900 x 10 - 6 U / Uges amounts. This reduction in layer contamination is the most important contribution to reduce matrix contamination in the fuel assembly. The one with the new Particles achieved matrix contamination of 47 x 10 - 6 U / Ug on average the high HHT / PNP requirements of U / Uges 100 x 10 - 6 for matrix contamination. The quality of the HTI particles could be increased in essential points layer thicknesses and densities have lower standard deviations. The anisotropy values are in the same band as for the THTR particles. The The comparability of the qualities must be similar to the introduction of the Mixed gas LTI coating can be proven by further measurements. These measurements are to be carried out by the IRW as part of the HBK project.
[de]
1. Einleitung: Im Rahmen des Vorhabens beschichtete Mischoxidkerne wurde Ende 1978 von HOBEG ein entscheidender Schritt zur Verringerung der Kontamination von HTI-BISO-Partikeln mit 400μm (Th,U)O2-Kernen getan. Die Kontamination der HTI-Schicht für die neuen Partikeln beträgt nur noch etwa 140 x 10-6 U/Uges, während die Kontamination der THTR-Standardpartikeln 600-900 x 10-6 U/Uges beträgt. Diese Senkung der Schichtkontamination ist der wichtigste Beitrag zur Verringerung der Matrixkontamination im Brennelement. Die mit den neuen Partikeln erreichte Matrixkontamination von im Mittel 47 x 10-6 U/Ug erfüllt die hohen HHT/PNP-Anforderungen von U/Uges 100 x 10-6 für die Matrixkontamination. Die Qualität der HTI-Partikeln konnte in wesentlichen Punkten gesteigert werden, Schicht-Dicken und Dichten besitzen geringere Standardabweichungen. Die Anisotropiewerte liegen im selben Band wie bei den THTR-Partikeln. Die Vergleichbarkeit der Qualitäten muß aber ähnlich wie bei der Einführung der Mischgas-LTI-Beschichtung durch weitere Messungen belegt werden. Diese Messungen sollen im Rahmen des HBK-Projekts vom IRW durchgeführt werden.Original Title
Messungen Für Einen Vergleich Von HTI-BISO Partikeln Mit Unterschiedlicher Kontamination
Primary Subject
Secondary Subject
Source
12 Mar 1979; 3 p; Country of input: International Atomic Energy Agency (IAEA); Document from Juelich Preservation Project; 12 tabs.
Record Type
Report
Report Number
Country of publication
Reference NumberReference Number
INIS VolumeINIS Volume
INIS IssueINIS Issue