[en] The pilot incinerator was built and operated successfully at design throughput with simulated wastes. Operating ranges of stable incinerator performance were defined as a function of air and waste feed rates for different materials and mixtures of materials. The complete range of waste materials can be burned without producing tar or soot. The limiting capacity of this incinerator is 0.5 kg/h if all latex rubber is charged or approximately 0.84 kg/h with a waste mixture. Off-gas particulate sampling prior to scrubbing indicates negligible solid carryover. The only material which may present off-gas cleaning problems is a light white smoke which accompanies the burning of PVC. The incinerator was operated continuously between 850 and 1000⁰C from startup on September 6, 1977 until shutdown on February 2, 1978. The 3.6-kW electric heater for the primary combustion chamber burned out on January 13; however, adequate burning temperatures were provided by the eight 1.25-kW heaters in the afterburner to maintain sootless burning. As a result, future incinerator operation will be at 900⁰C rather than 1000⁰C. After 5 months of operation, the condition of the ceramics was very good, and the metal components showed no deterioration or serious corrosion. The incinerator was modified by installing a different design gas burner block, and two baffles and a choke in the afterburner to increase turbulence and mixing. It was started up again on February 27, 1978