Results 1 - 4 of 4
Results 1 - 4 of 4. Search took: 0.013 seconds
|Sort by: date | relevance|
[en] This paper concerns an experimental study of the influence of short glass-fibres randomly oriented of a reinforced cement-based composite on the mechanical behaviour. The matrix material parameters used are: cement/sand ratio and water/cement ratio fixed at 0.5; the glass-fibre content (0%, 0.5%, 1.0%, 1.5%, 2% and 2.5%) and fibre lengths (3, 6 and 12 mm). Composites mechanical characterisation under static behaviour at flexural and compression tests, shows that the reinforcement effect is beneficial only in flexural case. A synergy (matrix-reinforcement) was observed when fibre length of 12 mm is used with application rate of 2% in flexural. The fatigue behaviour determined by Wöhler plots (stress-number of cycles to rupture), derived from experimental results; showed a large results dispersion which is attributed to many causes initiating this damage. The cyclic tests illustrate brittle character of these materials; even with low-amplitude cycles of loading no adaptation of these materials can be reported.
[es]Este trabajo aborda el estudio experimental de la influencia de fibras de vidrio cortas orientadas al azar sobre el comportamiento mecánico de un composite reforzado de base cemento. Los parámetros de la matriz utilizados son: relación cemento/arena y relación agua/cemento fijada en 0,5; el contenido de fibra de vidrio (0%, 0,5%, 1,0%,1,5%, 2% y 2,5%) y longitudes de fibra (3, 6 y 12 mm). Los resultados mecánicos de estos compuestos bajo comportamiento estático (flexión y compresión), muestran que el efecto de refuerzo es beneficioso unicamente a flexión. Se observó una sinergia (refuerzo de la matriz) cuando se usó la fibra de 12 mm con una tasa de aplicación del 2% en flexión. El comportamiento a fatiga determinado por las curvas de Wöhler (número de ciclos hasta la rotura), derivado de los resultados experimentales; mostró una gran dispersión de resultados que se atribuye a las muchas causas que pueden iniciar este daño. Las pruebas cíclicas ilustran el carácter quebradizo de estos materiales y no se puede indicar que exista adaptación de estos materiales, incluso con ciclos de carga de baja amplitud.
[en] Transport phenomena in two dimensional semiconductors have revealed unusual properties. In this thesis these systems are considered and discussed. The theories explain the Integral Quantum Hall Effect (IQHE) and the Fractional Quantum Hall Effect (FQHE). The thesis is composed of five chapters. The first and the second chapters lay down the theory of the IQHE, the third and fourth consider the theory of the FQHE. Chapter five deals with the statistics of particles in two dimension. (author). Refs
[en] In our contribution we are interested in tissue coagulation by Nd-YAG and Ar lasers in order to know which laser is necessary to use for the destruction of hepatic metastasis. For that we have developed a mathematical model, in which the liver tissue is considered homogeneous, and isotropic, the absorbed energies is optimized by the beam broadening model and the transfer of heat is modeled by the bioheat equation. The solution of this equation by the finite volumes method gives the space-time variation of the temperature, which makes it possible to determine the necrosis depth by using the Arrhenius integral. The results obtained show that the temperature of coagulation is reached for strong intensity in the case of the Nd-YAG laser compared with the Ar laser, and that the volume of the coagulated zone is considerable in the case of the Nd-YAG laser, from this fact it is selected in gastro-enterology. (author)
[en] At the present time, ischemia (heart disease) is a main cause of the death in the world; a promising method for its treatment is the use of the technology of the laser light of raised power for the ablation of the atherosclerosis plaques. In this paper, the thermodynamic processes will be studied at the beginning and during atheroma ablation using Nd-YAG (10-50 w) and Argon (4-10 w) lasers of a theoretical point of view. The spatial distribution of the temperature during the ablation has been modelated by the method of finite volumes. The manifestation of the raised temperature of the tissue at the threshold of the ablation, which describes the explosive nature of the ablation by laser (popcorn effect), is observed and discussed. The results indicate the quantitative differences in the ablation behavior between the two used lasers, which can have important clinical implications particularly in the reduction of thermal damages to surrounding normal tissue. (author)