[en] Eight fallow historic fields of the ponderosa pine and pinon-juniper cover types were surveyed to determine species composition and distribution. The purpose of the study was to understand plant succession on old fields as related to mechanically manipulated sites such as material disposal areas (MDAs). Additionally, the authors wanted a listing of species on disturbed lands of the Pajarito Plateau to aide in the reclamation planning of MDAs using native species. They also wanted to determine if any species could be used as an indicator of disturbance. The eight historic fields were all within Los Alamos County, New Mexico, and had been abandoned in 1943. Two sites were within the boundaries of Los Alamos National Laboratory and were studied both in 1982 and 1993. The study provides a description of each of the field sites, historic information about the homesteads from patent applications, a photographic record of some of the sites, and a listing of species found within each field. The study showed that there were 78 different plant species found on disturbed sites. Of these 78 species, 23 were found to be dominant on one or more of the MDAs or old fields. Although, the disturbance history of each site is imperfectly known, the study does provide an indication of successional processes within disturbed sites of the Pajarito Plateau. Additionally, it provides a listing of species that will invade disturbed sites, species that may be used in site reclamation

[en] Transverse beam combining is a cost-saving option employed in many designs for heavy-ion inertial fusion energy drivers. A major area of interest, both theoretically and experimentally, is the resultant transverse phase space dilution during the beam merging process. Currently, a prototype combining experiment is underway at LBNL and we have employed a variety of numerical descriptions to aid in both the initial design of the experiment data. These range from simple envelope codes to detailed 2- and 3-D PIC simulations. We compare the predictions of the different numerical models to each other and to experimental data at different longitudinal positions

[en] We report the achievement of a superpolished surface, suitable for x-ray reflection, on bare stainless steel. The rms roughness obtained on various samples varied from 2.2 to 4.2 angstrom, as measured by an optical profiler with a bandwidth 0.29-100 mm^-1. The type 17-4 PH precipitation-hardening stainless steel used to make the mirrors is also capable of ultrastability and has good manufactureability. This combination of properties makes it an excellent candidate material for mirror substrates. We describe the successful utilization of this type of steel in making elliptical-cylinder mirrors for a soft-x-ray microprobe system at the Advanced Light Source, and discuss possible for its unusual stability and polishability

[en] The future of neutron and x-ray scattering instrument development and international cooperation was the focus of the workshop. The international gathering of about 50 participants representing 15 national facilities, universities and corporations featured oral presentations, posters, discussions and demonstrations. Participants looked at a number of issues concerning neutron scattering instruments and the tools used in instrument design. Objectives included: (1) determining the needs of the neutron scattering community in instrument design computer code and information sharing to aid future instrument development, (2) providing for a means of training scientists in neutron scattering and neutron instrument techniques, and (3) facilitating the involvement of other scientists in determining the characteristics of new instruments that meet future scientific objectives, and (4) fostering international cooperation in meeting these needs. The scope of the meeting included: (1) a review of x-ray scattering instrument design tools, (2) a look at the present status of neutron scattering instrument design tools and models of neutron optical elements, and (3) discussions of the present and future needs of the neutron scattering community. Selected papers were abstracted separately for inclusion to the Energy Science and Technology Database

[en] This report discusses the possible environmental consequences of a planned hydroelectric power development of the river Grunnaai, Norway. The consequences are found to be small, provided the proper counter measures are taken. Without counter measures, there may be moderate consequences on fish populations and botanical conditions, directly dependent on the changed water flow. The greatest value of the area concerned lies in its unspoiled wilderness character. There are extensive lists of birds and mammals and plant species registered in the river valley. 51 refs., 7 figs., 4 tabs

[en] Following the crash of a tanker truck in the autumn of 1994, 27000 litres of petrol, paraffin and diesel oil accidentally spilt into the river Vulluelva, Norway. This report discusses the observed biological effects of the spill. The spill immediately killed the entire brown trout parr population in the lower half of the stream and 30% of the sea trout spawning population. A few weeks later, after extensive clean-up and of heavy flood, significant numbers of trout spawned within a limited river stretch in the lowest part of the stream and not in the normally more favoured spawning habitats further upstream. Analyses of the chloride content of blood plasma of parr and spawners sampled at the final phase of the spawning period showed only a few cases of stressed physiological condition. The significant variation in the observed egg survival in the river stretch preferred for spawning may be related to possible negative impacts by hydrocarbons. The study demonstrates no negative impacts on fry growth during the first season following the contamination. Mass mortality of the zoobenthos followed the oil spill in October 1994 and the populations of the dominating groups were reduced to a very low level. The recovery of zoobenthos was not complete until 9-10 months later. 62 refs., 8 figs., 11 tabs

[en] This volume describes the fuel rod material and performance models that were updated for the FRAPCON-3 steady-state fuel rod performance code. The property and performance models were changed to account for behavior at extended burnup levels up to 65 Gwd/MTU. The property and performance models updated were the fission gas release, fuel thermal conductivity, fuel swelling, fuel relocation, radial power distribution, solid-solid contact gap conductance, cladding corrosion and hydriding, cladding mechanical properties, and cladding axial growth. Each updated property and model was compared to well characterized data up to high burnup levels. The installation of these properties and models in the FRAPCON-3 code along with input instructions are provided in Volume 2 of this report and Volume 3 provides a code assessment based on comparison to integral performance data. The updated FRAPCON-3 code is intended to replace the earlier codes FRAPCON-2 and GAPCON-THERMAL-2. 94 refs., 61 figs., 9 tabs

[en] The National Geodetic Survey and the Nuclear Regulatory Commission jointly organized GPS surveys in 1987, 1990, 1993, and 1996 to search for crustal deformation in the central and eastern United States (east of longitude 108 degrees W). We have analyzed the data of these four surveys in combination with VLBI data observed during the 1979-1995 interval and GPS data for 22 additional surveys observed during the 1990-1996 interval. These latter GPS surveys served to establish accurately positioned geodetic marks in various states. Accordingly, we have computed horizontal velocities for 64 GPS sites and 12 VLBI sites relative to a reference frame for which the interior of the North American plate is considered fixed on average. None of our derived velocities exceeds 6 mm/yr in magnitude. Moreover, the derived velocity at each GPS site is statistically zero at the 95% confidence level except for the site BOLTON in central Ohio and the site BEARTOWN in southeastern Pennsylvania. However, as statistical theory would allow approximately 5% of the 64 GPS sites to fall our zero-velocity hypothesis, we are uncertain whether or not these estimated velocities for BOLTON and BEARTOWN reflect actual motion relative to the North American plate. We also computed horizontal strain rates for the cells formed by a 1 degrees by 1 degrees grid spanning the central and eastern United States. Corresponding shearing rates are everywhere less than 60 nanoradians/yr in magnitude, and no shearing rate differs statistically from zero at the 95% confidence level except for a grid cell near BEARTOWN whose rate is 57 ± 26 nanoradians/yr. Also corresponding areal dilatation rates are everywhere less than 40 nanostrain/yr in magnitude, and no dilatation rate differs statistically from zero at the 95% confidence level

[en] Soil samples have been collected routinely from the environs of the Hanford Site and analyzed since 1971. Correct interpretation of results depends on samples being collected from the same locations, the locations remaining relatively undisturbed, and collection and analytical procedures remaining the same or being equivalent. Historical files, documents, and annual environmental reports were reviewed to evaluate these factors. It was determined that 20 soil sampling locations, 11 onsite and 9 offsite, were established between 1971 and 1977 and represent long-term sampling locations. Sample collection and analytical procedures have remained essentially the same since 1971. The physical ecological attributes of each long-term soil sampling location were evaluated. During the review of historical records, a few results for 1970, 1971, and 1972 were noted as previously unreported in annual or special reports. These results are included in Appendix A. To complete the record, results previously reported in annual environmental reports are given in Appendix B. Global Positioning System (GPS) reading for 20 long-term soil sampling locations are provided in Appendix C

[en] The present policy on energy development is geared towards harnessing renewable and indigenous energy resource which can offer clean, abundant and efficient power supply for the country. a review of the current generation mix of the power system, especially the Luzon grid will establish a high dependency in imported fuel - oil and coal to power our generating plants. Thus, the policy of reducing dependence on imported fuel will depend largely on the success of tapping the alternative renewable and indigenous sources. The sustainable development era of the 90's brought fresh interest on the performance and commercial viability of indigenous and/or renewable sources of energy such as wind, solar, geothermal, natural gas and water power or hydropower. Among these alternative renewable sources, water or hydropower is the most readily available, and will produce clean domestic source of electricity - no carbon dioxide, sulfur dioxide, nitrous oxide or any other air emissions. The potential is available in most parts of the country that are mountainous and have high rainfall. In terms of production, hydropower leads as the most developed and more proven in terms of commercial viability. It is also more reliable, efficient and less expensive than geothermal, biomass, wind and solar energy, as will be shown later. (author)