[en] This third issue of the international DERBI conference has permitted to decipher the international actuality of renewable energies, to position the French national projects in this thriving context, and to discover the recent technological innovations. Californian companies were invited to this conference for a comparison of the policies in favor of renewable energy sources on both sides of the Atlantic ocean. This document gathers the transparencies presented at this conference and dealing with technologies, products, projects and realization in the following domains: solar cooling, biomass power plants, photovoltaic power plants and advances in photovoltaic engineering, solar thermal energy, thermodynamic solar power plants, architecture, renewable energies and the Eco-Building European project, biofuels, wood fuels, wind power and small wind power, geothermal energy. Presentations deal also with the financing of renewable energy projects, the competencies, employment and training, the numerical dimension, and the automation in the renewable energies domain. (J.S.)

[en] Recently, the interest in building-integrated photovoltaic installations has started to increase within governmental and municipality authorities, as well as some industrial companies. To serve a national public-awareness program of solar electricity promotion and education, the indigenous solar energy potential, optimization of possible PV installation, and three test cases of building-integrated grid-connected experimental facilities have been studied. The results showed the feasibility and performance of the proposed concepts. (Original)

[en] Between the systems that operate as of solar energy, the solar collectors to heat water have had wide use and application in the Country. Basically, a solar collector is constituted by: Box, thermal insulator, ducts and transparent roof. Generally, the used materials are the following: As thermal insulator: Polyurethane or glass fiber; as absorbent plate: Copper or aluminum, painting in dull black or selective surfaces; for the ducts: Generally it is used copper pipeline; and for the cover: Common glass or temperate glass

[en] This article argues that photovoltaic (PV) technology is already economically viable contrary to current opinion. A table of world PV module shipments for 1990 to 1998 by market sector is presented, and use of PV modules in consumer electronics such as calculators, battery trickle chargers, and garden lights; in communications and signals (eg. microwave repeaters, cellular communication); and in the residential sector in fluorescent lights, radios etc. are discussed. The early adopters of PV technology, and the value placed on PV devices by consumers are considered. Details of PV manufacturing costs for 1997, and forecasts for 2000 and 2010 are tabulated

[en] The analysis of existing and planned noise barriers along rails and roads has been carried out by the national partners together with national authorities, which are experts and responsible for the required data. The methodical approach of this study includes the set-up of a grid along longitude and latitudes with 1 by 1 degrees for Germany, Italy, France, United Kingdom and 0.5 by 0.5 degrees for the Netherlands and Switzerland. For each degree the length and orientation of rails and roads, the existing and planned noise barriers are registered and grouped according to their orientations. The solar radiation is based on data of a METEONORM data set. This includes the solar radiation on horizontal orientation as well as various inclination angles for all possible orientations. Moreover, possible shading has been considered. The technical specifications of noise barriers (PVNB) are based on the comprehensive knowledge of TNC GmbH and TNC AG with various plants realised. Technologies have been considered for both state-of-the-art and innovative concepts such as bifacial PVNB. In bifacial PVNB the PV-module is mounted vertically on both sides and is used at the same time as noise reflecting material. Installed PV power and produced electricity have been calculated for: 1. theoretical potential 2. technical potential 3. short-term resp. European extrapolated potential 4. anticipated potential 5. EU-member assessment The result of this study confirms the current activities to implement PV on noise barriers as an important share in the PV market.The report is subdivided into two volumes: Volume 1 contains the main topics and results, and Volume 2 contains additional information on the solar radiation, typical concepts as an excerpt of the various potentials and all country maps with the required explanations. 95 refs

[en] This proceedings is a collection of lectures presented at this symposium. The symposium C covers the following areas: industrial technology and engineering, new products and materials, information technology and basic sciences

[en] A new semiconductor alloy system, InGaAsN, has been identified as a candidate material for multi-junction solar cells having efficiencies greater than 40%. The introduction of small amounts of nitrogen ((approx)2%) into the InGaAs alloy system greatly reduces the band gap energy, with reductions approaching 0.4 eV for 2% nitrogen content. With the appropriate ratio of indium to nitrogen concentrations, InGaAsN can be lattice matched to GaAs

[en] While existing photovoltaic technologies continue to advance, there are still many exciting opportunities in the area of novel materials. These opportunities arise because there is a substantial need for reducing the costs associated with the preparation and processing of photovoltaics, and because the theoretically possible photovoltaic efficiencies have yet to be achieved in practical devices. Thus it remains reasonable to continue photovoltaic research activity aimed at entirely new approaches to processing and at entirely new materials as the active media. This group identified three areas for further consideration: (a) Nano/molecular composites and hierarchical structures; (b) Organic semiconductors; and (c) Hot carrier devices

[en] This paper examines three thin-film PV technologies: amorphous silicon, cadmium telluride, and copper indium selenide. The purpose is to: (1) assess their status and potential; (2) provide an improved set of criteria for comparing these existing thin films against any new PV technological alternatives, and examining the longer-term (c. 2050) potential of thin films to meet cost goals that would be competitive with conventional sources of energy without any added value from the substantial environmental advantages of PV. Among the conclusions are: (1) today's thin films have substantial economic potential, (2) any new approach to PV should be examined against the substantial achievements and potential of today's thin films, (3) the science and technology base of today's thin films needs substantial strengthening, (4) some need for alternative technologies exists, especially as the future PV marketplace expands beyond about 30 GW of annual production

[en] This paper introduces the engineer who is undertaking distributed generation projects to a wide range of financing options. Distributed generation systems (such as internal combustion engines, small gas turbines, fuel cells and photovoltaics) all require an initial investment, which is recovered over time through revenues or savings. An understanding of the cost of capital and financing structures helps the engineer develop realistic expectations and not be offended by the common requirements of financing organizations. This paper discusses several mechanisms for financing distributed generation projects: appropriations; debt (commercial bank loan); mortgage; home equity loan; limited partnership; vendor financing; general obligation bond; revenue bond; lease; Energy Savings Performance Contract; utility programs; chauffage (end-use purchase); and grants. The paper also discusses financial strategies for businesses focusing on distributed generation: venture capital; informal investors (''business angels''); bank and debt financing; and the stock market